Geodesy Map Projections and Coordinate Systems Geodesy the
- Slides: 51
Geodesy, Map Projections and Coordinate Systems • Geodesy - the shape of the earth and definition of earth datums • Map Projection - the transformation of a curved earth to a flat map • Coordinate systems - (x, y) coordinate systems for map data
Types of Coordinate Systems • (1) Global Cartesian coordinates (x, y, z) for the whole earth • (2) Geographic coordinates (f, , z) • (3) Projected coordinates (x, y, z) on a local area of the earth’s surface • The z-coordinate in (1) and (3) is defined geometrically; in (2) the z-coordinate is defined gravitationally
Global Cartesian Coordinates (x, y, z) Greenwich Meridian Z • O Y X Equator
Global Positioning System (GPS) • 24 satellites in orbit around the earth • Each satellite is continuously radiating a signal at speed of light, c • GPS receiver measures time lapse, Dt, since signal left the satellite, Dr = c. Dt • Position obtained by intersection of radial distances, Dr, from each satellite • Differential correction improves accuracy
Global Positioning using Satellites Dr 2 Number of Satellites 1 2 3 4 Object Defined Sphere Circle Two Points Single Point Dr 3 Dr 4 Dr 1
Geographic Coordinates (f, , z) • Latitude (f) and Longitude ( ) defined using an ellipsoid, an ellipse rotated about an axis • Elevation (z) defined using geoid, a surface of constant gravitational potential • Earth datums define standard values of the ellipsoid and geoid
Shape of the Earth We think of the earth as a sphere It is actually a spheroid, slightly larger in radius at the equator than at the poles
Ellipse An ellipse is defined by: Focal length = Distance (F 1, P, F 2) is constant for all points on ellipse When = 0, ellipse = circle For the earth: Major axis, a = 6378 km Minor axis, b = 6357 km Flattening ratio, f = (a-b)/a ~ 1/300 Z b O F 1 P a X F 2
Ellipsoid or Spheroid Rotate an ellipse around an axis Z b a O a X Rotational axis Y
Standard Ellipsoids Ref: Snyder, Map Projections, A working manual, USGS Professional Paper 1395, p. 12
Horizontal Earth Datums • An earth datum is defined by an ellipse and an axis of rotation • NAD 27 (North American Datum of 1927) uses the Clarke (1866) ellipsoid on a non geocentric axis of rotation • NAD 83 (NAD, 1983) uses the GRS 80 ellipsoid on a geocentric axis of rotation • WGS 84 (World Geodetic System of 1984) uses GRS 80, almost the same as NAD 83
Definition of Latitude, f m O q f S p n r (1) Take a point S on the surface of the ellipsoid and define there the tangent plane, mn (2) Define the line pq through S and normal to the tangent plane (3) Angle pqr which this line makes with the equatorial plane is the latitude f, of point S
Cutting Plane of a Meridian P Prime Meridian Equator Meridian plane
Definition of Longitude, = the angle between a cutting plane on the prime meridian and the cutting plane on the meridian through the point, P -150° 180°E, W 150° -120° 90°W (-90 °) 90°E (+90 °) P -60° -30° -60° 30° 0°E, W
Latitude and Longitude on a Sphere Meridian of longitude Z Greenwich meridian =0° N Parallel of latitude °N -90 =0 P • W =0 • -180 X O °W • Equator • R =0° =0 -180°E 0 = S 0° 9 - E - Geographic longitude - Geographic latitude Y R - Mean earth radius O - Geocenter
Length on Meridians and Parallels (Lat, Long) = (f, ) Length on a Meridian: AB = Re Df (same for all latitudes) Length on a Parallel: CD = Re D Cos f (varies with latitude) R D 30 N 0 N Re R C Df B Re A D
Example: What is the length of a 1º increment along on a meridian and on a parallel at 30 N, 90 W? Radius of the earth = 6370 km. Solution: • A 1º angle has first to be converted to radians p radians = 180 º, so 1º = p/180 = 3. 1416/180 = 0. 0175 radians • For the meridian, DL = Re Df = 6370 * 0. 0175 = 111 km • For the parallel, DL = Re D Cos f • = 6370 * 0. 0175 * Cos 30 • = 96. 5 km • Parallels converge as poles are approached
Representations of the Earth Mean Sea Level is a surface of constant gravitational potential called the Geoid Sea surface Ellipsoid Earth surface Geoid
Geoid and Ellipsoid Earth surface Ellipsoid Ocean Geoid Gravity Anomaly Gravity anomaly is the elevation difference between a standard shape of the earth (ellipsoid) and a surface of constant gravitational potential (geoid)
Definition of Elevation Z P • z = zp z = 0 Land Surface Mean Sea level = Geoid Elevation is measured from the Geoid
http: //www. csr. utexas. edu/ocean/egs 04. html
http: //www. csr. utexas. edu/ocean/mss. html
Vertical Earth Datums • A vertical datum defines elevation, z • NGVD 29 (National Geodetic Vertical Datum of 1929) • NAVD 88 (North American Vertical Datum of 1988) • takes into account a map of gravity anomalies between the ellipsoid and the geoid
Converting Vertical Datums • Corps program Corpscon (not in Arc. Info) – http: //crunch. tec. army. mil/software/corpscon. html Point file attributed with the elevation difference between NGVD 29 and NAVD 88 NGVD 29 terrain + adjustment = NAVD 88 terrain elevation
Geodesy and Map Projections • Geodesy - the shape of the earth and definition of earth datums • Map Projection - the transformation of a curved earth to a flat map • Coordinate systems - (x, y) coordinate systems for map data
Earth to Globe to Map Scale: Map Projection: Scale Factor Representative Fraction = Globe distance Earth distance (e. g. 1: 24, 000) = Map distance Globe distance (e. g. 0. 9996)
Geographic and Projected Coordinates (f, ) Map Projection (x, y)
Projection onto a Flat Surface
Types of Projections • Conic (Albers Equal Area, Lambert Conformal Conic) - good for East-West land areas • Cylindrical (Transverse Mercator) - good for North-South land areas • Azimuthal (Lambert Azimuthal Equal Area) - good for global views
Conic Projections (Albers, Lambert)
Cylindrical Projections (Mercator) Transverse Oblique
Azimuthal (Lambert)
Albers Equal Area Conic Projection
Lambert Conformal Conic Projection
Universal Transverse Mercator Projection
Lambert Azimuthal Equal Area Projection
Projections Preserve Some Earth Properties • Area - correct earth surface area (Albers Equal Area) important for mass balances • Shape - local angles are shown correctly (Lambert Conformal Conic) • Direction - all directions are shown correctly relative to the center (Lambert Azimuthal Equal Area) • Distance - preserved along particular lines • Some projections preserve two properties
Geodesy and Map Projections • Geodesy - the shape of the earth and definition of earth datums • Map Projection - the transformation of a curved earth to a flat map • Coordinate systems - (x, y) coordinate systems for map data
Coordinate Systems • Universal Transverse Mercator (UTM) - a global system developed by the US Military Services • State Plane Coordinate System - civilian system for defining legal boundaries • Texas State Mapping System - a statewide coordinate system for Texas
Coordinate System A planar coordinate system is defined by a pair of orthogonal (x, y) axes drawn through an origin Y X Origin (xo, yo) (fo, o)
Universal Transverse Mercator • Uses the Transverse Mercator projection • Each zone has a Central Meridian ( o), zones are 6° wide, and go from pole to pole • 60 zones cover the earth from East to West • Reference Latitude (fo), is the equator • (Xshift, Yshift) = (xo, yo) = (500000, 0) in the Northern Hemisphere, units are meters
UTM Zone 14 -99° -102° -96° 6° Origin -120° -90 ° Equator -60 °
State Plane Coordinate System • Defined for each State in the United States • East-West States (e. g. Texas) use Lambert Conformal Conic, North-South States (e. g. California) use Transverse Mercator • Texas has five zones (North, North Central, South) to give accurate representation • Greatest accuracy for local measurements
Texas Centric Mapping System • Designed to give State-wide coverage of Texas without gaps • Lambert Conformal Conic projection with standard parallels 1/6 from the top and 1/6 from bottom of the State • Adapted to Albers equal area projection for working in hydrology
Standard Hydrologic Grid (SHG) • Developed by Hydrologic Engineering Center, US Army Corps of Engineers • Uses USGS National Albers Projection Parameters • Used for defining a grid over the US with cells of equal area and correct earth surface area everywhere in the country
Arc. GIS Reference Frames • Defined for a feature dataset in Arc. Catalog • Coordinate System – Projected – Geographic • X/Y Domain • Z Domain • M Domain
Coordinate Systems • Geographic coordinates (decimal degrees) • Projected coordinates (length units, ft or meters)
X/Y Domain (Max X, Max Y) Long integer max value of 231 = 2, 147, 483, 645 (Min X, Min Y) Maximum resolution of a point = Map Units / Precision e. g. map units = meters, precision = 1000, then maximum resolution = 1 meter/1000 = 1 mm on the ground
Summary Concepts • Two basic locational systems: geometric or Cartesian (x, y, z) and geographic or gravitational (f, , z) • Mean sea level surface or geoid is approximated by an ellipsoid to define an earth datum which gives (f, ) and distance above geoid gives (z)
Summary Concepts (Cont. ) • To prepare a map, the earth is first reduced to a globe and then projected onto a flat surface • Three basic types of map projections: conic, cylindrical and azimuthal • A particular projection is defined by a datum, a projection type and a set of projection parameters
Summary Concepts (Cont. ) • Standard coordinate systems use particular projections over zones of the earth’s surface • Types of standard coordinate systems: UTM, State Plane, Texas State Mapping System, Standard Hydrologic Grid • Reference Frame in Arc. Info 8 requires projection and map extent
- Geodesy and geomatics engineering
- Institute of geodesy and photogrammetry
- Difference between pre indexing and post indexing
- Seabed geodesy
- Branches of geodesy
- Space geodesy facility
- Geodesy
- Geodesy
- Covalent bond in co
- Types of thematic maps ap human geography
- Usgs map projections poster
- Transformation from cartesian to spherical coordinates
- Rotating coordinate systems
- Virginia state plane coordinate system map
- Geographic coordinate system map
- Scalar projection vs vector projection
- Dot
- Vectors and the geometry of space
- Glass box concept
- Cabinet orthographic drawing
- 3 isometric axes
- 8-3 dot products and vector projections answers
- Hình ảnh bộ gõ cơ thể búng tay
- Ng-html
- Bổ thể
- Tỉ lệ cơ thể trẻ em
- Voi kéo gỗ như thế nào
- Tư thế worm breton là gì
- Alleluia hat len nguoi oi
- Các môn thể thao bắt đầu bằng từ đua
- Thế nào là hệ số cao nhất
- Các châu lục và đại dương trên thế giới
- Công thức tính độ biến thiên đông lượng
- Trời xanh đây là của chúng ta thể thơ
- Mật thư tọa độ 5x5
- Phép trừ bù
- Phản ứng thế ankan
- Các châu lục và đại dương trên thế giới
- Thể thơ truyền thống
- Quá trình desamine hóa có thể tạo ra
- Một số thể thơ truyền thống
- Bàn tay mà dây bẩn
- Vẽ hình chiếu vuông góc của vật thể sau
- Biện pháp chống mỏi cơ
- đặc điểm cơ thể của người tối cổ
- Ví dụ về giọng cùng tên
- Vẽ hình chiếu đứng bằng cạnh của vật thể
- Vẽ hình chiếu vuông góc của vật thể sau
- Thẻ vin
- đại từ thay thế
- điện thế nghỉ
- Tư thế ngồi viết