GAS FLAME DETECTION GAS DUST MONITORING YOUR ENVIRONMENT

GAS / FLAME DETECTION GAS / DUST MONITORING YOUR ENVIRONMENT, YOUR SAFETY, LET ’S MASTER THEM TOGETHER

MX 48 = 4 or 8 MX 15= single channel MX 32 = 2 independant channels MX 52 = 2 to 16 independant mixted channels WINGAS = 4 independant channels MX 42 A = 4 independant channels m e t s y s t n a MX 62 = d n u red Up to 64 independant channels

Measurement and alarm unit: MX 15

MX 15: easy installation • small-sized wall-mounted box • For low cost installations (boiler plants, battery charging rooms…) • DIN rail mounting…

Measurement and alarm unit: MX 15 • Synergy with new detectors OLC(T) 10 • Can be linked either with a single flammable detector (OLC 10/OLCT 10) • Or can be linked with two flammable detectors ( OLC 10 TWIN) • Or can be linked with one up to five toxic transmitters OLCT 10 ( CO, NO 2).

Example of wiring arrangement between MX 15 and 3 -activewire- detector: OLC 10 or OLCT 10.

between MX 15 and two flammable detectors: OLC 10 TWIN.

between MX 15 and two toxic transmitters OLCT 10.

MX 15 : user-friendly front panel - LED visual indications: - ON/OFF - AL 1 and AL 2 - Trouble LCD display, pictograms, concentration, type of gas and unit indication (programmable).

MX 15 : alarms and relays • ALARMS : • 2 independent programmable levels • Increasing or decreasing alarm • Automatic or manual, local or remote acknowledgement. • RELAYS: • 2 independent alarm relays • 1 fault relay • Fail safe (energized) or negative safety • Free potentiel contacts (2 A/250 ACV).

MX 15 : simple operation • • Keypad for using (menus): initialization (1 rst installation) programming (of channel) test (relays inhibited during calibration) • code (authorized people) • buzzer (mode).

MX 32: easy installation • small-sized wall-mounted box • protected front face • IP 66 housing.

MX 32: relays • Per channel: • 1 independent relay for each gas alarm (2) • 1 common relay for troubles. D 1 1 2 2

MX 32: keypad • • • maintenance menus: initialization (1 st installation) channel programming calibration (relays inhibited) Code (authorized people) buzzer ( local audible alarm).

MX 42 A • Wall-mounting housing: easy to install • 1 to 4 independent channels

MX 42 A : ergonomic front panel

MX 42 A: relays COMMON BLOCK D 3 Channel 1 channel 2 channel 3 channel 4 1 2 1 2 - per channel: 1 independent relay per instantaneous gas alarm (2) - 1 common relay for the 3 rd gas alarms (from each channel), or for all the gas alarms - 1 common fault alarm relay

MX 42 A: analog outputs COMMON BLOCK Channel 1 2 3 4 - recorder or PLC or data logging. 4 - 20 m. A + - + - + Common an independent 4 -20 m. A output per channel. ground

MX 42 A: programming

MX 42 A: maintenance switches : 6 7 8

Maintenance switches • Position 0 = OFF • position 1 = ON 0 1 6 7 8 • 8 = on/off • 7 = calibration (flashing yellow LED and alarm relay - inhibition) • 7 + 6 = programming (flashing yellow LED and alarm relay - inhibition).

Maintenance switches: calibration • 8 + 7 = : calibration • « 0 and Span » setting with potentiometers 7 8

KEYBOARD • 8 : normal mode Call on display (for 1 mn) • 7 + 6 = programming - states - values. . . + Messages : - AL 1 - AL 2 - AL 3 - Point - Time

WINGAS MULTI-CHANNEL CONTROLLER

WINGAS • WINGAS is a fixed controller : • with a wall mounting housing IP 54 • for COMMERCIAL and INDUSTRIAL markets.

WINGAS : 2 versions • WINGAS DIGITAL: with display • WINGAS : without display

WINGAS : multi-channel controller • 4 channels • 1 transmitter 4/20 m. A 2 or 3 wires per channel • specific case : up to a maximum of 5 transmitters CO 4/20 m. A 2 wires • No explo bridge detector.

WINGAS : configuration CASING FRONT PANEL 6 fils 123456 Display Pcb MAIN Pcb Vers boîte relais

WINGAS : ALARMS • 2 GAS alarms per channel COMMON FAULT ALARM

WINGAS : on-board RELAYS • 2 GAS alarm common relays • 1 buzzer copy common relay • 1 FAULT alarm common relay

WINGAS: FRONT PANEL Gas alarm lamps On/off lamp Fault lamp Acknowledgement Maintenance button Display (digital version )

WINGAS DIGITAL • Only in the case of a WINGAS DIGITAL we can connect a remote box fitted with 8 relays • Each gas alarm AL 1 and AL 2 of WINGAS DIGITAL will then drive 2 remote relays AL 1 and AL 2.

REMOTE BOX • The remote box is connected to the wingas digital with a 6 wire cable : max. length = 30 m (0. 9 mm 2). to wingas digital

WINGAS NETWORK Network: up to 32 WINGAS maximum

WINGAS NETWORK • The network WINGAS RS 485 is driven by a software: WINGASCOM • It allows to visualize and program the different WINGAS connected to the network

MX 48 • Metal wall- mounting housing • 4 to 8 independent channels.

MX 48 : presentation • BUS/MICRO/display card • common block • 2 cards (4 channels per card)

MX 48: front panel • AL 1 and AL 2 = instantaneous alarms • AL 3 = delayed or averaged alarm

MX 48 : relays - 2 common relays (Al 3 and faults) - 2 relays (Al 1/Al 2) per channels 1 to 4 5 to 8

Analog outputs: 4 to 20 m. A -an independent 4 /20 m. A output per channel : to recorder, PLC. .

communications: RS 232 and RS 485 COMMUNICATION < < <> RS 232< < > COM 52 < < > > RS 485 > >> SUPERVISION

MX 48 : maintenance • with push-buttons : • calibration • programming

MX 52 - rack 3 U/19 inc. - 2 to 16 channels ( features of MX 48 = MX 52 ).

MX 52 : configuration

MX 62 • a safety system. . .