FLY Group members Eugene Ignatius Adrian Tristan Eugene

FLY

Group members Eugene Ignatius Adrian Tristan

Eugene Good points Bad points hardworking Always forget to bring stuff

Ignatius Good points Bad points Good in IT -NIL-

Adrian Good points Bad points Able to correct mistakes lazy

Tristan Good points Bad points Innovative Lazy

The poor No money No basic survival necessities No new clothes Usually in debt

Young adults Not much income Has not much wisdom in life Is more prone to scams than adults

Teenagers Rebellious Stubborn

Elderly Weak Frail Sick Sight problems Cannot hear

The ELDERLY Important: low resistance to the weather elements

The Idea 1 Umbrella that is connected to waist-belt Ø This will be connected to the waist to save space for the elderly

The Idea 2 Auto-washing machine Ø It will provide a certain amount of comfort for the user

The Idea 3 o Windbreaker Ø The idea is to install a DIY heater into the windbreaker to keep the elderly warm

Windbreaker Expensive No pockets

Voting! Umbrella Washing machine Windbreaker 2 3 6

Voting 2 Black 5 Blue 3 Pink 3 Colours of the windbreaker White 3

Voting 3 Waterproof Non-waterproof 10 0

Voting 4 Shiny appearance Dull appearance 10 0

Conclusion Idea 1, black, waterproof, shiny appearance

THE JACKET This is an example:

Modifications Add cost of heater into the amount

Modification: Price S$195 S$75) S$120 (decrease by Profit maybe about 10% instead 30% Decrease by 20%, about S$20

Placement of added parts (Pocket) (rear) Heater (Pocket)

Heater Uses rechargeable battery: Energy Source Small and compact

Heater>Heating coil We are going to use a heating coil that will tap into a battery within a battery holder through wires which will also conduct heat throughout the jacket.

Heater>heating coil>for parts Nichrome wire

Heater>heat The heating coil will utillize the heating element(air or water)and send that heat throughout the jacket through wires

Factor 1 Materials on the jacket: Fur Cotton Copper wire

FACTOR 2 Materials for the heater Motor Hardcover casing

Heater materials Hardcover case: ->Styrofoam & tampered glass Resin? ? Motor? ?

Final Heater Design The heater itself is the plastic container The switch is the syringe - Up is off and down is on The conducting wire is sewn into the bottom rim of the jacket Another pair of heating wires leading to the sleeves could have been stuck on with red tape The batteries are any size just so long as contact between the aluminum foil is made

The heater The switch is the syringe which contains the battery and heating coil is in the heating box The syringe and the heating box can be put into the pocket. The conducting wire is sewn into the bottom rim of the jacket

Finished product

SCAMPER Applying scamper to our design

S=substitute We substituted a windbreaker into a jacket

C=COMBINE We combined the jacket and windbreaker

A=adapt We adapted to the various needs of the project

M=MODIFY We used a reflective cloth instead of using aluminum

P=PUT TO OTHER USE The 4 different categories can use this

E-ELIMINATE Remove the idea of a bulky heater

Our blog ipwfly. wordpress. com

Credits Facebook Google The people who participated in our survey

The end We have come to the end of our presentation Thank you for your attention