Flow chart A B Flow A Criteria pollutant
Flow chart A, B Flow A: Criteria pollutant test with emission worst case EMW Test 1 REMW 1 > L EMW : typically tested by TVH with emission worst case driver selectable mode Yes Flow B: CO 2 and Fuel consumption test for TVH and TVL (with Predominant mode or Best and worst case mode) * All emission results must comply with the Test 1* criteria pollutant emission standards. R 1 < Declared value + x % Rejected Yes No No Test 2* : accept Vehicle_H (or L) test REMW 1 > 0. 9 L Yes EMW Test 2 * Yes (R 1+R 2)/2 < Declared value + x % No No REMW 2 > L WLTP-08 -31 e x % shall be discussed. Less than 4%. Use average of three results (R 1+R 2+R 3)/3 Yes Test 3* No Use declared value CO 2 FC R 1 CO 2 R 1 FCR 1 Pollutant (i) R 2 CO 2 R 2 FCR 2 REMW 1 PEMW 1(i) R 3 CO 2 R 3 FCR 3 REMW 2 PEMW 2(i) TVH or TVL Result Average (PEMW 1(i), PEMW 2(i)) TVHCO 2 or TVLCO 2 ="Declared value" or "(R 1+R 2+R 3)/3" TVHFC or TVLFC = "Declared value" or "(R 1+R 2+R 3)/3" TVInd Combined app. (TVHCO 2, TVLCO 2) Combined app. (TVHFC, TVLFC) Accepted
Flow chart C Flow C: Range and EC test for TVH and TVL Test 1* R 1 < Declared value + 0 % * All emission results must comply with the criteria pollutant emission standards. Yes Use declared value No Test 2* (R 1+R 2)/2 < Declared value + 0 % Yes No 0% tolerance for Range and EC. Use average of three results (R 1+R 2+R 3)/3 Test 3* Range EC R 1 Range. R 1 ECR 1 R 2 Range. R 2 ECR 2 R 3 Range. R 3 ECR 3 TVH or TVL TVHRange or TVLRange ="Declared value" or "(R 1+R 2+R 3)/3" TVHEC or TVLEC = "Declared value" or "(R 1+R 2+R 3)/3" TVInd Combined app. (TVHRange, TVLRange ) Combined app. (TVHEC, TVLEC)
Judgment and results Flow chart without declared value EM Flow chart with declared value ● Test results Corrected by approved cycle value ● CO 2 ● FC-combined ● FC-each phase - EC-combined ● EC-each phase - Rangecombined ● Range-each phase ● ● ●
- Slides: 5