FCI and FCX Range FCI and FCX Range

FCI and FCX Range

FCI and FCX Range Heating Capacity • From 8500 BTU/h up to 58000 BTU/h (water in = 158°F ; air in = 68°F ; Δt water = 18°F (max fan speed) • From 4950 BTU/h up to 35000 BTU/h (water in = 122°F ; air in = 68 °F ; Δt water = 18°F (max fan speed) Cooling Capacity • From 3500 BTU/h up to 26000 BTU/h (water in = 44. 6°F ; air in = 66. 2°F wb 80. 6°F db ; Δt water = 9°F max fan speed) Size: -8 Size with 3 rows coils -6 Size with 4 row coils Power Supply : 120 – 1 – 60 Hz 277 – 1 – 60 Hz 230 – 1 – 60 Hz (inverter)

FCI and FCX Range: Frame Push-pull coil connections 3 or 4 row coil optional 1 row coil for 4 pipe system Filter ABS plastic for the fans

Ventilation SILENT EASY TO CHECK INSIDE HIGH EFFICIENCY NEW CENTRIFUGAL FAN

FCXI and FCX Range • • Heating high or low water temperature Quickly achieve room set temperature Low noise High air quality, fresh air can be ducted in Easy to install and maintain Optional working pressure up to 500 PSI (Standard is 115 PSI) 24 volt or 110 volt control on FCX 24 volt or 220 volt control on FCXI

FCX-US Universal Installation FCX-US universal installation: vertical free standing or wall FCX-USE universal with direct expansion coil, no controls

FCX-USP Duct • • • FCX-USP duct FCX-USPE duct with direct expansion coil FCX-USPO duct with multiple-speed extra-strength motor for bigger available pressure

Advantages • Comfort: minimum deviation from set point • Acoustic Comfort: • The speed change modulates continously based on the difference between set point and actual ambient temperature (extremely low noise) • The min speed is much lower of the nominal min speed in a traditional fan coil and therefore the noise level is much lower

Comfort Continuous modulation allows for minimal temperature fluctuation

Possible Version • Single coil 3 or 4 rows 2 pipe fan coil • 2 coils (3 rows + 1 row BV) for four pipes fan coil • With valve 24 V

Thank You For Your Time