Enter Username and Password Username Password OK Enter

Enter Username and Password Username: Password: OK

Enter Test Unit Serial Number Serial #: OK

Conduct Drop #1 Front Face

Conduct Drop #2 Back Face

Conduct Drop #3 Bottom Face

Conduct Drop #4 Top Face

Conduct Drop #5 Left Face

Conduct Drop #6 Right Face

Add drop test orientation device for edges by sliding the block into the drop table. OK

Conduct Drop #7 Front-Bottom Edge

Conduct Drop #8 Front-Left Edge

Conduct Drop #9 Front-Top Edge

Conduct Drop #10 Front-Right edge

Conduct Drop #11 Back-Bottom Edge

Conduct Drop #12 Back-Left Edge

Conduct Drop #13 Back-Top Edge

Conduct Drop #14 Back-Right Edge

Conduct Drop #15 Bottom-Left Edge

Conduct Drop #16 Bottom-Right Edge

Conduct Drop #17 Top-Left Edge

Conduct Drop #18 Top-Right Edge

Remove the edge orientation device and add the “right check” orientation device for corners. OK

Conduct Drop #19 Front-Bottom-Left Corner

Conduct Drop #20 Front-Top-Right Corner

Conduct Drop #21 Back-Bottom-Right Corner

Conduct Drop #22 Back-Top-Left Corner

Remove the “right check” orientation device and add the “left check” orientation device for corners. OK

Conduct Drop #23 Front-Bottom-Right Corner

Conduct Drop #24 Front-Top-Left Corner

Conduct Drop #25 Back-Bottom-Left Corner

Conduct Drop #26 Back-Top-Right Corner