Electronic CircuitII Chapter 6 Topics in the Chapter

Electronic Circuit-II Chapter 6

Topics in the Chapter 6 Ø The Oscillator, Ø Feedback Oscillator Principles, Ø Oscillator with RC Feedback Circuits, Ø Oscillator with LC Feedback Circuits, Ø Relaxation Oscillators, Ø The 555 Timer As An Oscillator.

OSCILLATOR DEFINITION Ø Oscillators are electronic circuits that generate an output signal without the necessity of an input signal. Ø They are used as signal sources in all sorts of applications.

Feedback Oscillator Principles

OSCILLATORS WITH RC FEEDBACK CIRCUITS Three types of feedback oscillators that use RC circuits to produce sinusoidal outputs. (1)The Wien-bridge oscillator, (2)The phase-shift oscillator, (3)The twin-T oscillator. Generally, RC feedback oscillators are used for frequencies up to about 1 MHz The Wien-bridge is by far the most widely used type of RC feedback oscillator for this range of frequencies.

The Wien-Bridge Oscillator

OSCILLATORS WITH LC FEEDBACK CIRCUITS Although the RC feedback oscillators, particularly the Wien bridge, are generally suitable for frequencies up to about 1 MHz, LC feedback elements are normally used in oscillators that require higher frequencies of oscillation.

Types of resonant LC feedback oscillators: i. Colpitts oscillator. ii. Clapp oscillator, iii. Hartley, oscillator, iv. Armstrong oscillator, v. And crystal-controlled oscillators.

The Colpitts Oscillator

The Clapp Oscillator

RELAXATION OSCILLATORS The second major category of oscillators is the Relaxation oscillators use an RC timing circuit and a device that changes states to generate a periodic waveform. Relaxation Oscillator are used to produce nonsinusoidal waveforms.

A Practical Triangular-Wave Oscillator

THE 555 TIMER AS AN OSCILLATO The use of the 555 timer as a voltage controlled oscillator (VCO)