Downie Drywall Systems SIG Distribution Waste Management Process

Downie Drywall Systems & SIG Distribution Waste Management Process

Present Situation 10 -20% of Plasterboard delivered to site end up as waste. So approx 1 in every 5 loads of plasterboard delivered end up as Waste, and ends up in a Landfill location

Regulations and Legislation lan ent P agem e Man Wast Site Waste Management Plan 2008 Copyright SIG Insulations 2007 Environment Agency Plasterboard must be segregated from other materials Contractor’s Responsibility

Licences Waste Carriers Licence Enables SIG Vehicles to transport waste Waste Transfer Exemption Store Waste at SIG branches Waste Transfer Note Creates Audit trail on movement of waste Copy of Waste Carrier licence in all vehicles (Legal Requirement) Copyright SIG Insulations 2007

1, Downie Drywall order materials and Waste bags through SIG Cardiff Distribution branch to be delivered at the same time Process 6, New West Gypsum process the waste into a gypsum powder, and sell to Plasterboard manufacturers and Other Market Sectors. None of this waste goes to Landfill 2, Downie Drywall operatives loads Bags with segregated Plasterboard waste on site Downie Drywall & SIGD Waste Management System 5, Full Bags are loaded on to Artic trailer and despatched to New West Gypsum, Avonmouth for Processing 4, Bags are weighed at branch and report generated. Bags are then stored under cover at the branch 3, Full bags are collected from site with delivery of additional materials and waste bags

Summary Downie Drywall Systems works in partnership with SIG Distribution for Drywall Materials and Plasterboard Waste Management. All Plasterboard waste is sent to New West Gyspum Recycling Centre for processing. None of the Waste is sent to Landfill

Contact Details Downie Drywall Systems Limited Singleton Court Wonastow Road, Monmouth NP 25 5 JA Tel: 01600 719 365 Sheffield Insulations Cardiff Branch Southpoint Foreshore Way Cardiff CF 10 5 SP Tel: 02920 662 900