doc IEEE 802 19 yyxxxxr 0 Month Year

doc. : IEEE 802. 19 -yy/xxxxr 0 Month Year [place presentation subject title text here] Date: YYYY-MM-DD Authors: Notice: This document has been prepared to assist IEEE 802. 19. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Submission Slide 1 John Doe, Some Company

doc. : IEEE 802. 19 -yy/xxxxr 0 Month Year Abstract [place presentation abstract text here] Submission Slide 2 John Doe, Some Company

doc. : IEEE 802. 19 -yy/xxxxr 0 Month Year 802. 19 Template Instructions • To properly identify your Power. Point presentation as an IEEE 802. 19 Submission follow the following steps. – Step 1: Obtain a document number (has the form yy/xxxx) from the Mentor web site – Step 2: Fill in the Header with the Month/Year on the left and the document number on the right – Step 3: Fill in the Footer on the right with author name and company – Step 4: Title slide: Fill in the presentation subject title text, the full date (in ISO 8601 format of YYYY-MM-DD), and the complete author(s) details – Step 5: Add content to the presentation – Step 6: Upload the presentation to Mentor web site Submission Slide 3 John Doe, Some Company

doc. : IEEE 802. 19 -yy/xxxxr 0 Month Year • [begin placing presentation body text here] Submission Slide 4 John Doe, Some Company

doc. : IEEE 802. 19 -yy/xxxxr 0 Month Year References Submission Slide 5 John Doe, Some Company