doc IEEE 802 15 02393 September 2002 Project

doc. : IEEE 802. 15 -02/393 September 2002 Project: IEEE P 802. 15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [UWB Channel Modeling Sub-committee Goals and Agenda] Date Submitted: [6 September, 2002] Source: [Jeff Foerster] Company [Intel Research and Development] Company [Intel Corporation] Address [JF 3 -212, 2111 N. E. 25 th Ave. , Hillsboro, OR, 97124] Voice [503 -264 -6859], FAX: [503 -264 -3483] E-Mail: [jeffrey. r. foerster@intel. com] Re: [] Abstract: [] Purpose: [Agenda and goals for channel modeling sub-committee. ] Notice: This document has been prepared to assist the IEEE P 802. 15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P 802. 15. Submission 1 Intel Research and Development

doc. : IEEE 802. 15 -02/393 September 2002 SG 3 a Channel Modeling Subcommittee Goals and Agenda Jeff Foerster Intel Research and Development Intel Corporation Submission 2 Intel Research and Development

doc. : IEEE 802. 15 -02/393 September 2002 Agenda Submission 3 Intel Research and Development

doc. : IEEE 802. 15 -02/393 September 2002 Channel Modeling Sub-committee Goals for this Sub-committee: “To create a channel model for use by the IEEE 802. 15. 3 a task group to evaluate the proposed PHYs in realistic channels representative of actual deployment environments. ” Goals for this week: 1. Generate a working draft sub-committee report a. b. 2. Begin process of filling in text of the report a. b. 3. Provides an initial, coherent draft of current channel modeling approach by subcommittee Allow people to make specific comments to specific sections Path loss model i. Approve an initial baseline path loss model Multipath model i. Approve an initial baseline multipath model Develop plan for completing final report (target approval in November) a. b. Submission Plan for interim conference calls? Solicit volunteers to help fill in TBD sections 4 Intel Research and Development

doc. : IEEE 802. 15 -02/393 September 2002 Presentation of Current Draft Report Motion (to be made by Jeff Foerster): “To accept draft IEEE P 802. 15 -02/368 r 1 -SG 3 a as the current working draft report for the Channel Modeling Subcommittee. ” Second? Proposed process for changing sub-committee report: 1. 2. 3. 4. Within sub-committee, allow changes with 50% approval. Target final sub-committee report to be complete in November. During November, vote to handoff final report to task group and close subcommittee work. Note that the purpose of this report is to influence the Selection Criteria document, which is owned by the task group. After November, task group owns sub-committee report and can make changes to the sub-committee report and/or selection criteria as desired (process TBD by task group). Submission 5 Intel Research and Development

doc. : IEEE 802. 15 -02/393 September 2002 Path Loss Model Discussion Motion (to be made by Jeff Foerster): “To accept the proposed text for the path loss model in Section 1. 1 of IEEE P 802. 15 -02/380 r 0 -SG 3 a for Section 3. 3. 1 in current working draft report IEEE P 802. 1502/368 r 1 -SG 3 a. ” Second? Submission 6 Intel Research and Development

doc. : IEEE 802. 15 -02/393 September 2002 Multipath Model Discussion Motion (to be made by Jeff Foerster): “To accept as a baseline multipath model the modified Salah. Valuenzuela model, as described in Section 2. 1 in IEEE P 802. 15 -02/380 r 0 -SG 3 a, with proposed change 2 in Section 2. 1. 1. ” Second? Submission 7 Intel Research and Development