d MT SPC Surface Protective Coatings d MTSPC

d. MT – SPC Surface Protective Coatings d. MT-SPC dry protective coatings contain a mixture of d. MT – SPC Metallschutzprodukte auf Trockenbasis special components (no graphite) which create and continually maintain an optimal coefficient of friction between two surfaces

Example: Block System with 5 Steel Applicators Rotating Drum Equipment d. MT - Surface Protective Coatings System for Support Trunnions and Rings on Kilns, Rotating Furnaces, Dryers, Mills, etc. This picture shows a example of a SPC DRR-5. 0 L Block System with 5 spring-loaded, steel applicators. The number of required blocks / applicators or size of the unit depends upon the width of the trunnions or rings to be coated. Type TSB-085 -DRR Blocks are used on supporting trunnions without a drive function. SPC blocks are to be inserted from the rear side of each applicator.

Rotating Drum Equipment SPC-Coatings for trunnions and tyres of rotating furnaces, kilns, dryers (noticable „mirror image“ on surface) SPC-TRB-100 blocks with steel applicators mounted against tyre surface

Rotating Drum Equipment SPC-Coatings for trunnions and tyres, as well as thrust rollers, on rotating furnace Rotating incinerator for hazardous waste at a chemicals production plant DRR-T-4. 0 low c. o. f. block-Kit SPC-TRB-100 low c. o. f. block with stainless-steel applicator type KR-RB-160