Components kb WL breaker configurator 06142019 Unrestricted Siemens

Components kb WL breaker configurator 06/14/2019 Unrestricted © Siemens Industry, Inc. EM / COMPAS

New communication module in WL breaker – COM 35 The WLCOM 35 is a new communication module for the WL breaker. It is an expansion to our portfolio and not a replacement for the existing WLCOM 16 & WLCOM 15. It provides faster Ethernet connectivity compared to RS 485 -based PROFIBUS or Modbus RTU. As with COM 15/16, all breaker data can be communicated and all parameters set. Key features: • • • COMPAS GO: • Communication is available under the ETU Options. It communicates both PROFINET IO and Modbus TCP over Ethernet Both protocols can be used simultaneously Dual-master capable Two switched Ethernet ports for daisy-chain operation Data set structure is compatible with the existing COM 15/16 data set structure for ease of integration Has outputs for controlling 24 V dc shunt trip and close coil for remote breaker control and a Write-Protect input to block remote changes • User configurable input and output can be programmed to implement Dynamic Arc Flash Sentry actuation/indication without external Cubicle. BUS modules COMPAS Desktop: • Allows stand-alone DAS at a reduced cost versus using digital input and output modules; 24 V dc • Communication is available under the Trip Unit compatible input for activation, 24 V dc @ 1 A output for indication (blue LED) Details. • Physical form-factor is nearly identical: mounts in the same location with the same hardware. • Wiring points are the same as for COM 15/16 • Can be retrofit to replace a COM 15/16 to provide Ethernet communication without any changes to the breaker • In order to accommodate the Ethernet connectors on the front of the module, an additional 0. 6” is required between the module and panel door. Right-angle Ethernet cables should be used to minimize the space required but breaker control switches should not be located directly in front of the COM 35. Unrestricted © Siemens Industry, Inc. Page 2 XX. 20 XX EM/ COMPAS

Components kb MCCB configurator 06/14/2019 Unrestricted © Siemens Industry, Inc. EM / COMPAS

Added 400 A and 600 A 3 VA breakers to MCCB configurator Thermal Magnetic trip unit: Electronic trip unit: • • 3 VA 53 400 A Frame, 2/3/4 - Pole, Thermal-Magnetic Trip Unit Trip Amps: 200 A to 400 A • • 3 VA 63 400 A Frame 3/4 - Pole Electronic Trip Unit Trip Amps: 250 A to 400 A • • 3 VA 54 600 A Frame, 2/3/4 - Pole, Thermal-Magnetic Trip Unit Trip Amps: 400 A to 600 A • • 3 VA 64 600 A Frame 3/4 - Pole Electronic Trip Unit Trip Amps: 400 A to 600 A • Please note that enclosures for these breakers are not available at this point but they will be available in near future. Unrestricted © Siemens Industry, Inc. Page 4 XX. 20 XX EM/ COMPAS

How to select 400 A and 600 A 3 VA breakers Thermal Magnetic trip unit: Electronic trip unit: • Go to MCCB configurator • Select appropriate Voltage, Interrupting rating • Set Trip unit type to Thermal Magnetic • Set Trip unit type to Solid State • Set Frame amperage to 400 A or 600 A • Select appropriate values for Trip amperage and poles • Drop down the selection for Breaker ID @ IR and select 3 VA 53 or • Drop down the selection for Breaker ID @ IR and select 3 VA 63 or 3 VA 64 3 VA 54 Unrestricted © Siemens Industry, Inc. Page 5 XX. 20 XX EM/ COMPAS