Chapter 10 Liquids and Solids States of Matter

  • Slides: 56
Download presentation
Chapter 10 Liquids, and Solids

Chapter 10 Liquids, and Solids

States of Matter The fundamental difference between states of matter is the distance between

States of Matter The fundamental difference between states of matter is the distance between particles.

States of Matter Because in the solid and liquid states particles are closer together,

States of Matter Because in the solid and liquid states particles are closer together, we refer to them as condensed phases.

The States of Matter • The state a substance is in at a particular

The States of Matter • The state a substance is in at a particular temperature and pressure depends on two antagonistic entities: 1. The kinetic energy of the particles; 2. The strength of the attractions between the particles.

Intermolecular Forces (IMF) Intramolecular Intermolecular attractions (between molecules ) are weak Intramolecular (within molecules)

Intermolecular Forces (IMF) Intramolecular Intermolecular attractions (between molecules ) are weak Intramolecular (within molecules) attractions are strong

Intermolecular Forces They are strong enough to control physical properties such as: – –

Intermolecular Forces They are strong enough to control physical properties such as: – – boiling point melting point vapor pressure viscosity

Intermolecular Forces These intermolecular forces as a group are referred to as van der

Intermolecular Forces These intermolecular forces as a group are referred to as van der Waals forces.

van der Waals Forces 1. Dipole-Dipole: Molecules with permanent dipoles 2. Hydrogen Bond: Special

van der Waals Forces 1. Dipole-Dipole: Molecules with permanent dipoles 2. Hydrogen Bond: Special type of dipole-dipole 3. Ion-dipole: Ionic substance placed in polar substance, strongest van der Waals force 4. Ion-induced Dipole: Nonpolar substance placed in highly polar substance 5. Dipole-induced Dipole: Strongly polar substance causes a nonpolar substance to become polarized 6. London Dispersion Forces: Due to temporary relocation of electrons producing a temporary dipole Intermolecular Forces

Bond Strength IMF / van der Waals Forces Order of strength: strongest > weakest

Bond Strength IMF / van der Waals Forces Order of strength: strongest > weakest 1. Hydrogen bonding (Special type of Dipole-Dipole 2. Dipole-dipole attraction 3. London dispersion forces Bond Type Dissociation Energy (k. J/mol) Ionic >400 Covalent Halides 150 -400 Intermolecular Forces Hydrogen 12 -16 Dipole-Dipole 0. 5 -2 London Dispersion <1

Dipole-Dipole Interactions • Molecules that have permanent dipoles are attracted to each other. –

Dipole-Dipole Interactions • Molecules that have permanent dipoles are attracted to each other. – The positive end of one is attracted to the negative end of the other and viceversa. – These forces are only important when the molecules are close to each other.

Dipole-Dipole Interactions The more polar the molecule, the higher its boiling point.

Dipole-Dipole Interactions The more polar the molecule, the higher its boiling point.

Molar Masses, BP & vap. H NONPOLAR Molar Mass BP POPLAR Molar Mass vap.

Molar Masses, BP & vap. H NONPOLAR Molar Mass BP POPLAR Molar Mass vap. H BP vap. H N 2 28 -196 5. 57 CO 28 -192 6. 04 Si. H 2 32 -112 12. 10 PH 3 34 -88 14. 06 Ge. H 4 77 -90 14. 06 As. H 3 78 -62 16. 69 vap. H is the amount of energy required for the molecules to escape the forces of attraction. It takes more energy to separate molecules that are polar than nonpolar. Intermolecular Forces © 2009, Prentice-Hall, Inc.

London Dispersion Forces Electrons in the 1 s orbital repel each other and tend

London Dispersion Forces Electrons in the 1 s orbital repel each other and tend to stay far away from each other Electrons occasionally wind up on the same side of the atom.

London Dispersion Forces At that instant the atom is polar, with excess electrons on

London Dispersion Forces At that instant the atom is polar, with excess electrons on the left side and a shortage on the right side.

London Dispersion Forces Atom #1 gets an induced dipole as the electrons on the

London Dispersion Forces Atom #1 gets an induced dipole as the electrons on the left side of atom #2 repels the electrons in the cloud on atom #1 London dispersion forces are electrostatic attractions between an instantaneous dipole and an induced dipole.

London Dispersion Forces • These forces are present in all molecules, whether they are

London Dispersion Forces • These forces are present in all molecules, whether they are polar or nonpolar. • The process of inducing a dipole is polarization. • The tendency of an electron cloud to distort in this way is called polarizability.

Factors Affecting London Forces • The shape of the molecule affects the strength of

Factors Affecting London Forces • The shape of the molecule affects the strength of dispersion forces: long, skinny molecules (like n-pentane tend to have stronger dispersion forces than short, fat ones (like neopentane). • This is due to the increased surface area in n-pentane.

Factors Affecting London Forces • The strength of dispersion forces tends to increase with

Factors Affecting London Forces • The strength of dispersion forces tends to increase with increased molecular weight. • Larger atoms have larger electron clouds which are easier to polarize.

Which Have a Greater Effect? Dipole-Dipole Interactions or Dispersion Forces • If two molecules

Which Have a Greater Effect? Dipole-Dipole Interactions or Dispersion Forces • If two molecules are of comparable size and shape, dipole-dipole interactions will be the dominating force. ↑polar = ↑bp • If one molecule is much larger than another, dispersion forces will likely determine its physical properties. ↑ MW = ↑bp

How Do We Explain This? • The nonpolar series (Sn. H 4 to CH

How Do We Explain This? • The nonpolar series (Sn. H 4 to CH 4) follow the expected trend. • The polar series follows the trend from H 2 Te through H 2 S, but water is quite an anomaly.

Hydrogen Bonding • The dipole-dipole interactions experienced when H is bonded to N, O,

Hydrogen Bonding • The dipole-dipole interactions experienced when H is bonded to N, O, or F are unusually strong. • We call these interactions hydrogen bonds.

Hydrogen Bonding • Hydrogen bonding arises in part from the high electronegativity of nitrogen,

Hydrogen Bonding • Hydrogen bonding arises in part from the high electronegativity of nitrogen, oxygen, and fluorine. When hydrogen is bonded to one of those very electronegative elements, the hydrogen nucleus is exposed.

Summarizing Intermolecular Forces © 2009, Prentice-Hall, Inc.

Summarizing Intermolecular Forces © 2009, Prentice-Hall, Inc.

Intermolecular Forces Affect Many Physical Properties The strength of the attractions between particles can

Intermolecular Forces Affect Many Physical Properties The strength of the attractions between particles can greatly affect the properties of a substance or solution. Molecules on surface are subject to attractions on side and below.

Viscosity • Resistance of a liquid to flow is called viscosity. • It is

Viscosity • Resistance of a liquid to flow is called viscosity. • It is related to the ease with which molecules can move past each other. • Viscosity increases with stronger intermolecular forces and decreases with higher temperature.

Surface Tension Surface tension results from the net inward force experienced by the molecules

Surface Tension Surface tension results from the net inward force experienced by the molecules on the surface of a liquid.

Solids One method of classifying solids is into two groups: 1. Crystalline, in which

Solids One method of classifying solids is into two groups: 1. Crystalline, in which particles are in highly ordered arrangement.

Solids 2. Amorphous, in which there is no particular order in the arrangement of

Solids 2. Amorphous, in which there is no particular order in the arrangement of particles. Ex. glass

Types of Crystalline Solids Based upon particle at lattice points & bonds: 1. Ionic

Types of Crystalline Solids Based upon particle at lattice points & bonds: 1. Ionic Solids – ions at lattice points & ionic 2. Atomic Solids – atoms at lattice points a) Metallic Solids – delocalized covalent bonds b) Network Solids – strong covalent bonds c) Group 8 A Solids – London Dispersion Forces 3. Molecular Solids – small molecules at lattice points a) Dipole-Dipole b) London Dispersion Forces Intermolecular Forces

Ionic Crystalline Solids Because of the order in a crystal, we can focus on

Ionic Crystalline Solids Because of the order in a crystal, we can focus on the repeating pattern of arrangement called the unit cell. There are 3 cubic unit cells.

Ionic Crystalline Solids There are several types of basic arrangements in crystals, like the

Ionic Crystalline Solids There are several types of basic arrangements in crystals, like the ones depicted above. You can calculate the net number of spheres in a particular unit cell.

Ionic Crystalline Solids We can determine the empirical formula of an ionic solid by

Ionic Crystalline Solids We can determine the empirical formula of an ionic solid by determining how many ions of each element fall within the unit cell.

Ionic Crystalline Solids What are the empirical formulas for these compounds? (a) Green: chlorine;

Ionic Crystalline Solids What are the empirical formulas for these compounds? (a) Green: chlorine; Gray: cesium (b) Yellow: sulfur; Gray: zinc (c) Gray: calcium; Blue: fluorine (a) Cs. Cl (b) Zn. S (c) Ca. F 2 Intermolecular Forces

Metallic Solids • Metals are not covalently bonded, but the attractions between atoms are

Metallic Solids • Metals are not covalently bonded, but the attractions between atoms are too strong to be van der Waals forces. • In metals valence electrons are delocalized throughout the solid.

Metallic Solids In metallic solids, atoms pack themselves so as to maximize the attractions

Metallic Solids In metallic solids, atoms pack themselves so as to maximize the attractions and minimize repulsions between the ions. Such an arrangement is called closest packing.

Network Solids • Diamonds are an example of a covalent-network solid, in which atoms

Network Solids • Diamonds are an example of a covalent-network solid, in which atoms are covalently bonded to each other. – They tend to be hard and have high melting points – Are brittle and not good conductors

Molecular Solids • Graphite is an example of a molecular solid, in which atoms

Molecular Solids • Graphite is an example of a molecular solid, in which atoms are held together with van der Waals forces. – Tend to be softer and have lower melting points. – Slippery and good conductors

Graphene • The Strongest Material Known to Mankind What is Graphene? • Applications for

Graphene • The Strongest Material Known to Mankind What is Graphene? • Applications for Graphene

Vapor Pressure and Changes of State Phase Changes

Vapor Pressure and Changes of State Phase Changes

Energy Changes Associated with Changes of State Heat of fusion Hfus = energy change

Energy Changes Associated with Changes of State Heat of fusion Hfus = energy change solid liquid @ mp Heat of vaporization Hvap = energy change liquid gas @ bp

Heating Curve for Water Time • The heat/energy added to the system at the

Heating Curve for Water Time • The heat/energy added to the system at the mp and bp goes into pulling the molecules farther apart from each other. • The temperature of the substance does not rise during a phase change.

Vapor Pressure • At any temperature some molecules in a liquid have enough energy

Vapor Pressure • At any temperature some molecules in a liquid have enough energy to escape. • As the temperature rises, the fraction of molecules that have enough energy to escape increases.

Vapor Pressure As more molecules escape the liquid, the pressure they exert increases.

Vapor Pressure As more molecules escape the liquid, the pressure they exert increases.

Vapor Pressure The liquid and vapor reach a state of dynamic equilibrium: liquid molecules

Vapor Pressure The liquid and vapor reach a state of dynamic equilibrium: liquid molecules evaporate and vapor molecules condense at the same rate.

Vapor Pressure • The bp of liquid is temperature when vapor pressure equals atmospheric

Vapor Pressure • The bp of liquid is temperature when vapor pressure equals atmospheric pressure. • The normal bp is temperature at which its vapor pressure is 760 torr.

Phase Diagrams Phase diagrams display the state of a substance at various pressures and

Phase Diagrams Phase diagrams display the state of a substance at various pressures and temperatures and the places where equilibria exist between phases.

Phase Diagrams • The circled line is the liquid-vapor interface. • It starts at

Phase Diagrams • The circled line is the liquid-vapor interface. • It starts at the triple point (T), the point at which all three states are in equilibrium.

Phase Diagrams It ends at the critical point (C); above this critical temperature and

Phase Diagrams It ends at the critical point (C); above this critical temperature and critical pressure the liquid and vapor are indistinguishable from each other.

Phase Diagrams Each point along this line is the boiling point of the substance

Phase Diagrams Each point along this line is the boiling point of the substance at that pressure.

Phase Diagrams • The circled line in the diagram below is the interface between

Phase Diagrams • The circled line in the diagram below is the interface between liquid and solid. • The melting point at each pressure can be found along this line.

Phase Diagrams • Below the triple point the substance cannot exist in the liquid

Phase Diagrams • Below the triple point the substance cannot exist in the liquid state. • Along the circled line the solid and gas phases are in equilibrium; the sublimation point at each pressure is along this line.

Phase Diagram of Water • Note the high critical temperature and critical pressure. –

Phase Diagram of Water • Note the high critical temperature and critical pressure. – These are due to the strong van der Waals forces between water molecules.

Phase Diagram of Water • The slope of the solid-liquid line is negative. –

Phase Diagram of Water • The slope of the solid-liquid line is negative. – This means that as the pressure is increased at a temperature just below the melting point, water goes from a solid to a liquid.

Phase Diagram of Carbon Dioxide Carbon dioxide cannot exist in the liquid state at

Phase Diagram of Carbon Dioxide Carbon dioxide cannot exist in the liquid state at pressures below 5. 11 atm; CO 2 sublimes at normal pressures.

Carbon Dioxide The low critical temperature and critical pressure for CO 2 make supercritical

Carbon Dioxide The low critical temperature and critical pressure for CO 2 make supercritical CO 2 a good solvent for extracting nonpolar substances (like caffeine) CO 2 as supercritical fluid A menagerie of phase diagrams

Types of Bonding in Crystalline Solids

Types of Bonding in Crystalline Solids