CELL PHONE BASED DTMF CONTROLLED GARAGE DOOR OPENING
CELL PHONE BASED DTMF CONTROLLED GARAGE DOOR OPENING SYSTEM. Prepared By: Fatima Dmaidi. Majd Darweesh. Noor Salman. SUPERVISOR: Dr. Kamel Subhi.
OUTLINES : � Introduction. � Overview. � Design. � Flow chart of the project. � DTMF. � Arduino. � H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
OUTLINES : �Introduction. � Overview. � Design. � Flow chart of the project. � DTMF. � Arduino. � H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
Introduction : � The main objective of this project is to unlock a garage door by a mobile phone using a unique number entered through the keypad of the phone after entering the password given to the user. � This project is based on the concept of DTMF (dual tone multi - frequency).
OUTLINES : � Introduction. �Overview. � Design. � Flow chart of the project. � DTMF. � Arduino. � H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
Overview: �Our system consists of DTMF decoder, Arduino, Gate driver, H-bridge, DC motor (PM motor) to achieve our goal.
OUTLINES : � Introduction. � Overview. �Design. � Flow chart of the project. � DTMF. � Arduino. � H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
Design :
OUTLINES : � Introduction. � Overview. � Design. �Flow chart of the project. � DTMF. � Arduino. � H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
OUTLINES : � Introduction. � Overview. � Design. � Flow chart of the project. �DTMF. � Arduino. � H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
DTMF : Ø DTMF is a common communication term for touch tone phones. 16 button keypad.
DTMF : Ø The frequencies generated on pressing different keys are shown in the table: DTMF 1209 frequency Hz 1336 Hz 1447 Hz 697 Hz 770 Hz 852 Hz 941 Hz 2 5 8 0 3 6 9 # 1 4 7 *
DTMF Decoder: Ø This DTMF decoder circuit identifies the dial tone from the telephone line and decodes the key pressed on the remote telephone.
DTMF decoder:
DTMF decoder connected to the cellular phone:
Output of DTMF decoder:
Settings of the phone connected with the system: 1. A SIM card must be inserted in the phone. 2. Automatic answering mode must be selected.
OUTLINES : � Introduction. � Overview. � Design. � Flow chart of the project. � DTMF. �Arduino. � H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
Arduino: �We �The used Arduino Uno in our project. Arduino Uno is a microcontroller board based on the ATmega 328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs).
Output of the Arduino : 1 3 2
OUTLINES : � Introduction. � Overview. � Design. � Flow chart of the project. � DTMF. � Arduino. �H-Bridge. � DC Motor (PM Motor). � Results. � Future work.
H-bridge and gate drive:
Pulses from Arduino Output of ir 2110
Vavg 0 Speed distance Vavg=(0. 75*Vdc-0. 25*Vdc )/T
Vavg=(0. 75*Vdc-0. 25*Vdc )/T
� vvv
Vavg 0 Speed Distance Vavg=(0. 25*Vdc-0. *Vdc )/T
�VEDIO
OUTLINES : � Introduction. � Overview. � Design. � Flow chart of the project. � DTMF. � Arduino. � H-Bridge. �DC motor (PM motor). � Results. � Future work.
DC Motor (PM motor ) :
OUTLINES : � Introduction. � Overview. � Design. � Flow chart of the project. � DTMF. � Arduino. � H-Bridge. � DC motor (PM motor). �Results. � Future work.
Door design:
Simulation and real implementation:
Opening the door :
1 Speed variation curve
2
Distance curve in simulation:
Closing the door
1 � 1 Speed variation curve
Distance variation, closing:
Motor connected to the door: .
� VEDIO
� Conclusion
Future work
- Slides: 49