Automotive Training Equipment Petrol engine DOHC FSI cutway

Automotive Training Equipment Petrol engine DOHC FSI cutway YESA-10000 LT Feature & Specification Description: Educational training engine model is based on original components of the direct fuel injection (FSI) engine, which can be used for demonstration of the engine direct fuel injection FSI and its gas distribution mechanism DOHC operation. Cutaway model painted with different colors. Educational purpose of the engine model: - Demonstration of the different components of the engine; Demonstration of the DOHC timing belt replacement using special tools; Demonstration of the alternator belt replacement; Technical specifications and functions Visible components of the sectioned engine model: • Engine block • Engine head • Crankshaft • Connecting rods • DOHC dual overhead camshaft (camshafts, valve lifters, water pump and etc. ) • Pistons with rings • Timing belt with camshaft sprocket and tensioners • Alternator belt with tensioner • CR high pressure fuel pump; • Steering hydraulic pump; • Conditioner compressor. *Note. Image, specification and model No. of equipment can be changed by manufacturing process without special reporting. YES 01, Youngil Education System 1 www. yes 01. co. kr/en Tel : 82 -2 -2024 -0077

Automotive Training Equipment Petrol engine DOHC FSI cutway YESA-10000 LT Feature & Specification Engine model in cutaway: • Visually visible at least the following elements: pistons, piston rings, combustion chambers, inlet and outlet ducts, components for gas distribution mechanisms, spray guns and spark plug nipples in the combustion chamber; • The piston and gas distribution mechanism must be secured by turning the crankshaft; • All friction surfaces of rotating, moving parts and assemblies must be lubricated. Demonstration of belt exchange for generator and gas distribution mechanism : The training model must be equipped with all original engine components of the car: generator and gas distribution mechanism belts, tensioners, camshafts gear wheels Other parameters and requirements Cross-section of the training engine is protected by transparent safety plastic panel model come with a work table; training engine model is equipped with bench clamps The training engine model is equipped with special DOCH FSI tool kit for timing belt replacement *Note. Image, specification and model No. of equipment can be changed by manufacturing process without special reporting. YES 01, Youngil Education System 2 www. yes 01. co. kr/en Tel : 82 -2 -2024 -0077