Automation and Drives GGKennung oder Produktname SIMATIC S

  • Slides: 29
Download presentation
Automation and Drives GG-Kennung oder Produktname SIMATIC S 7 -300 The universal PLC for

Automation and Drives GG-Kennung oder Produktname SIMATIC S 7 -300 The universal PLC for system solutions with production engineering as focal point

Automation and Drives SIMATIC S 7 -300 within the system family SIMATIC S 7

Automation and Drives SIMATIC S 7 -300 within the system family SIMATIC S 7 -300 Introduction CPUs High-end range/ Medium range S 7 -400 Highlights Modules Design, Installation Communications and HMI Configuring Maintenance Mid- and low-end Performance range S 7 -300 The universal PLC for system solutions with production engineering as focal point Micro PLCs S 7 -200 + Programming devices + STEP 7 software + Communication + Human Machine Interface SIMATIC S 7 -300 A&D AS, 08/2004, Chart 2 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Totally Integrated Automation SIMATIC S 7 -300 Introduction CPUs Highlights S

Automation and Drives Totally Integrated Automation SIMATIC S 7 -300 Introduction CPUs Highlights S 7 -300 – The best-selling controller from Totally Integrated. Automation S 7 -300 – The automation platform for production engineering Modules Design, Installation Communications and HMI Configuring Maintenance SIMATIC S 7 -300 A&D AS, 08/2004, Chart 3 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives The new standard CPUs - Highlights SIMATIC S 7 -300 Introduction

Automation and Drives The new standard CPUs - Highlights SIMATIC S 7 -300 Introduction CPUs The Highlights Modules Design, Installation Shorter machine cycle times n Reduced command execut. times Cut engineering costs Platform for engineering tools and Runtime-Software n Modular programming n Cut operating costs Micro Memory Card (MMC) instead of batteries n Project archiving on MMC n Change programs by just switching MMC n Communications and HMI Configuring Maintenance Less mounting volume n 40 mm instead of 80 mm wide The Innovation of the S 7 -300 family SIMATIC S 7 -300 A&D AS, 08/2004, Chart 4 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives The new standard CPUs SIMATIC S 7 -300 CPU-Type 312 314

Automation and Drives The new standard CPUs SIMATIC S 7 -300 CPU-Type 312 314 315 -2 DP 315 -2 PN/DP 317 -2 PN/DP 318 16 KB 48 KB* 128 KB 512 KB DI / DO 256 1024 AI / AO 64 256 256 0, 2/2 µs 5/6 µs 0, 1/1 µs 2/3 µs 0, 05/0, 2 µs 0, 2/1 µs 0, 1/0, 1 µs ? /0, 6 µs Flags 1024 2048 16384 32768 8192 Timers 128 256 512 Counters 128 256 512 6 12 16 32 32 PROFIBUS-DP Master/Slave MPI usable as DP PROFIBUS-DP Master/Slave MPI useable as DP Introduction CPUs The Highlights Modules Design, Installation Communications and HMI Configuring Maintenance User Memory Processing Time Bit/Word Fix-Float. Point Connections Communication PROFINET/Ethernet u. PROFINET IO *from 12/04 64 k. B SIMATIC S 7 -300 A&D AS, 08/2004, Chart 6 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Compact-CPUs Integrated technological functions SIMATIC S 7 -300 V Introduction CPUs

Automation and Drives Compact-CPUs Integrated technological functions SIMATIC S 7 -300 V Introduction CPUs The P I D U t CPU type t CPU 312 C CPU 313 C-2 Pt. P CPU 313 C-2 DP CPU 314 C-2 Pt. P CPU 314 C-2 DP Connectable sensors Incremental encoder (24 V DC), pulse encoder with directional signal Incremental encoder, pulse encoder with directional signal Number of channels 2 3 4 Limit frequency max. 10 k. Hz max. 30 k. Hz max. 60 k. Hz Highlights Modules Design, Installation Communications and HMI Configuring Maintenance Counting Frequency measurement Yes, 2 channels, max. 10 k. Hz Yes, 3 channels, max. 30 k. Hz Yes, 4 channels, max. 60 k. Hz Pulse-width measurement Number of pulse outputs 2 3 4 Limit frequency 2. 5 k. Hz Controlled positioning No No 1 axis Closed-loop control No PID SIMATIC S 7 -300 A&D AS, 08/2004, Chart 8 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Compact CPUs – Benefits Integrated technological functions SIMATIC S 7 -300

Automation and Drives Compact CPUs – Benefits Integrated technological functions SIMATIC S 7 -300 Introduction CPUs The Highlights Modules Design, Installation Communications and HMI Configuring Maintenance No supplementary modules required Save cost and money Optimized memory requirement and runtime t n Technological functions arean integral part of the operating system No additional programming overhead V Save resources t Simple and flexible n Pre-configured functions can be integrated into the user program via standard blocks n Parameters can PID be modified by program Parameterization instead of programming SIMATIC S 7 -300 A&D AS, 08/2004, Chart 9 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - Performance SIMATIC S 7 -300 Introduction n Efficient processing

Automation and Drives Highlights - Performance SIMATIC S 7 -300 Introduction n Efficient processing speed for short machine cycle times CPUs 50 ns / binary instr. Highlights Modules Design, Installation Communications and HMI n Graduated line of CPUsfrom the entry-level CPU to the high-capacity CPU Configuring Maintenance n Communication via integrated interfaces n n MPI Point to Point PROFIBUS-DP PROFINET/Ethernet SIMATIC S 7 -300 Integration A&D AS, 08/2004, Chart 11 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - Diverse applications SIMATIC S 7 -300 Introduction n C

Automation and Drives Highlights - Diverse applications SIMATIC S 7 -300 Introduction n C 7 control systems with integrated HMI on the basis of the S 7 -300 CPUs Highlights Modules Design, Installation Aufbau und Montage Communications and HMI n Distributed Safety S 7 -300 F with fail safe I/O modules for central and distributed applications HMI Failsafe Configuring n ET Maintenance 200 S, ET 200 X Intelligent Interface modules, based on S 7 -300 – or the standard S 7 -300 as PROFIBUS DP Slave Distributed SIMATIC S 7 -300 A&D AS, 08/2004, Chart 12 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - Micro Memory Card concept SIMATIC S 7 -300 n

Automation and Drives Highlights - Micro Memory Card concept SIMATIC S 7 -300 n Backup of program Introduction and data without battery CPUs Maintenance-free Highlights Modules Design, Installation n STEP 7 project management (symbols, comments) Easy to use Communications and HMI Configuring Maintenance n Easy program update by means of Micro Memory Card (MMC) n Access to MMC in RUN Archiving of meas. values n Recipe management n SIMATIC S 7 -300 Service-friendly Process optimization Quality assurance A&D AS, 08/2004, Chart 13 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - Communications integrated: MPI, PROFIBUS-DP interface SIMATIC S 7 -300

Automation and Drives Highlights - Communications integrated: MPI, PROFIBUS-DP interface SIMATIC S 7 -300 Introduction CPUs Highlights Modules Design, Installation Communications and HMI Configuring Maintenance n Interfaces MPI integrated into every CPU n DP in 315 -2 DP, 316 -2 DP, 318 -2 DP S 7 -300 n any point in the network (Routing) n HMI services for connection of OP/OS PG (Master) n Programming from no additional programming n minimal CPU cycle load ET 200 S (Slave) ET 200 M (Slave) n ET 200 X (Slave) n Communications functions for S 7 n Low-cost communication without the need for additional hardware SIMATIC S 7 -300 PROFIBUS DP ET 200 B/L (Slave) S 7 -300 A&D AS, 08/2004, Chart 14 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - Engineering SIMATIC S 7 -300 Introduction n Efficient configuring

Automation and Drives Highlights - Engineering SIMATIC S 7 -300 Introduction n Efficient configuring and programming with world standard STEP 7 CPUs IEC 61131 -3 Highlights Modules Design, Installation Communications and HMI n Higher availability thanks to powerful integrated diagnostics Availability Configuring Maintenance n Easiest start imaginable with STEP 7 Lite - the programming package for basic functions Intuitive operating SIMATIC S 7 -300 A&D AS, 08/2004, Chart 15 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - Test and diagnostics functions SIMATIC S 7 -300 n

Automation and Drives Highlights - Test and diagnostics functions SIMATIC S 7 -300 n System diagnostics Shorten down times System wide fault diagnostics from CPU to I/O n Internal CPU services (e. g. error message with time stamp) n Introduction CPUs Highlights Increase productivity Modules Design, Installation Communications and HMI n Process diagnostics Monitoring critical process signals at the program level n Simply assign parameters using. S 7 -PDIAG and Pro. Agent n CPU generates messages automatically for S 7 HMI for more transparency for service personnel n Configuring Maintenance SIMATIC S 7 -300 A&D AS, 08/2004, Chart 16 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - I/O SIMATIC S 7 -300 n Comprehensive line Introduction

Automation and Drives Highlights - I/O SIMATIC S 7 -300 n Comprehensive line Introduction of I/O modules CPUs Highlights Modules Design, Installation n For technological tasks Runtime software, Functions integratedin the CPU n Function modules n n Communications and HMI Configuring Maintenance n Identical I/O n n Wide variety of applications modules for centralized configurations distributed configurations (ET 200 M) Cost reduction for warehousing and logistics SIMATIC S 7 -300 A&D AS, 08/2004, Chart 17 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Highlights - Modular packaging system SIMATIC S 7 -300 n Space-saving,

Automation and Drives Highlights - Modular packaging system SIMATIC S 7 -300 n Space-saving, Introduction CPUs modular design without slot rules for compact machine controls Highlights Modules Design, Installation Communications and HMI n Fanless operation without rotating parts Configuring Maintenance n Versatile connection systems n n n Screw-type terminal system Spring-type terminal system Prefabricated (TOP Connect) SIMATIC S 7 -300 Reduced maintenance costs Less installation overhead A&D AS, 08/2004, Chart 18 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Modules for S 7 -300 SIMATIC S 7 -300 Introduction CPUs

Automation and Drives Modules for S 7 -300 SIMATIC S 7 -300 Introduction CPUs Highlights The Modules Design, Installation Communications and HMI Configuring n Power Supplies classified according to capacity n Signal modules for digital and analogsignals and hazardous areas n Point-to-Point CPs for I/O devices of all kinds n Function modules for high-speed counting, positioning, closed-loop control and cam control Maintenance Flexible combinations for all applications SIMATIC S 7 -300 A&D AS, 08/2004, Chart 19 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Signal modules to suit any requirement Digital modules SIMATIC S 7

Automation and Drives Signal modules to suit any requirement Digital modules SIMATIC S 7 -300 Introduction CPUs Highlights The Modules Design, Installation Communications and HMI Digital inputs Digital outputs Voltage/ current range DC 24. . . 125 V AC 120 / 230 V DC 24 / 48. . . 125 V AC 5. . . 230 V 0, 5 / 1 / 2 / 5 A Channels (optically isolated) 8, 16, 32 electr. / Relais Sensors Switches, 2 -wire Beros Resolution Configuring Encoding time Maintenance Ex (i) Namur / Ex(i) Diagnostics yes SIMATIC S 7 -300 A&D AS, 08/2004, Chart 20 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Signal modules to suit any requirement Analog modules SIMATIC S 7

Automation and Drives Signal modules to suit any requirement Analog modules SIMATIC S 7 -300 Analog inputs Analog outputs Voltage/ current range +/- 80 m. V. . . 10 V, +/-3, 2 m. A, 0/4. . . 20 m. A u. a. +/- 10 V, 0. . . 10 V, +/- 20 m. A, 0/4. . . 20 m. A, u. a. Channels (optically isolated) 2, 4, 8 with integrated linearization 2, 4, 8 Sensors 2 -, 3 -, 4 - wire resistor (Pt 100), thermocouples Resolution 9 to 16 bit incl. sign bit Encoding time 2, 5. . . 100 ms 0, 8 ms Ex (i) Namur / Ex(i) Diagnostics yes Introduction CPUs Highlights The Modules Design, Installation Communications and HMI Configuring Maintenance SIMATIC S 7 -300 A&D AS, 08/2004, Chart 21 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Point-to-point CPs for special interfaces SIMATIC S 7 -300 Programming device,

Automation and Drives Point-to-point CPs for special interfaces SIMATIC S 7 -300 Programming device, PC, computers Introduction Robot controls CPUs Opto-electronics Highlights The Modules Design, Installation Communications and HMI Configuring Maintenance Scanner, barcode reader, Identification systems Pinterr n 1 or 2 interfaces, up to 76 kbit/s n Different physical transmission environment n Standard or custom-specific protocols S 7 -300 weighing systems, controller SIMATIC S 5 and also PLCs from other manufacturers Easy and flexible SIMATIC S 7 -300 A&D AS, 08/2004, Chart 22 © Siemens AG 2004 - Änderungen vorbehalten

Function Modules (FM) for all technologies Automation and Drives SIMATIC S 7 -300 Introduction

Function Modules (FM) for all technologies Automation and Drives SIMATIC S 7 -300 Introduction CPUs Highlights The Modules Design, Installation Communications and HMI Configuring The right choice when. . . tasks have to be taken care of at top speed. . . The very highest accuracyand reproducibility are required. . . Special sensors or actuators are required. . . technological tasks require practical solutions Maintenance Counting, measuring, cam control, positioning, closed-loop control SIMATIC S 7 -300 A&D AS, 08/2004, Chart 23 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives A modular system with compact design SIMATIC S 7 -300 Introduction

Automation and Drives A modular system with compact design SIMATIC S 7 -300 Introduction CPUs Highlights Modules Design, Installation Communications and HMI Configuring Maintenance n Rugged, enclosed modules n Integrated, easy-to-connect backplane bus n High module density, up to 32 channels per module n Minimum mounting depth due to recessed and covered connectors and plugs n Power supply modules in the case of AC mains connection for supplying the S 7 -300 and sensors/actuators SIMATIC S 7 -300 A&D AS, 08/2004, Chart 24 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Mounting made easy SIMATIC S 7 -300 Introduction CPUs Highlights Modules

Automation and Drives Mounting made easy SIMATIC S 7 -300 Introduction CPUs Highlights Modules Design, Installation Communications and HMI Configuring Maintenance n Simply snap the module onto the mounting rail n No slot rules n No jumper settings required on the module n Horizontal or vertical mounting n Front connectors with in Screw- or n Spring-loaded terminals n n Self-coding front connectros make sure that theright connector is plugged in after module replacement Reduction of installation costs thanks to extremely easy handling SIMATIC S 7 -300 A&D AS, 08/2004, Chart 25 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives TOP Connect the user-friendly wiring solution SIMATIC S 7 -300 Introduction

Automation and Drives TOP Connect the user-friendly wiring solution SIMATIC S 7 -300 Introduction CPUs Highlights Modules Design, Installation Communications and HMI Configuring Maintenance Direct connection of sensors/ actuators using 2, 3 and 4 wiring techniques ninexpensive and polarized thanks to prefabricated wiring nsaves the intermediate terminal in the switchgear cubicle Distance max. 30 m Terminal blocks can be connected to S 7 -300 standard I/O modules via front connectors nscrew-type or nspring-type terminals TOP Connect: Klemmblöcke Reduction in high-overhead wiring SIMATIC S 7 -300 A&D AS, 08/2004, Chart 26 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Multi-tier expansion via interface modules SIMATIC S 7 -300 Two-tier configuration

Automation and Drives Multi-tier expansion via interface modules SIMATIC S 7 -300 Two-tier configuration n CPUs Highlights up to 16 modules in central controller and expansion units (for signal modules) Low-cost solution Modules Design, Installation Communications and HMI Configuring Four-tier configuration n up to 32 modules in central controller and expansion units (for any modules) Up to 10 m Expansion units Introduction Up to 10 m Flexible solution Up to 10 m Maintenance Central controller SIMATIC S 7 -300 A&D AS, 08/2004, Chart 27 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives With S 7 -300 to all communication networks SIMATIC S 7

Automation and Drives With S 7 -300 to all communication networks SIMATIC S 7 -300 Introduction CPUs Highlights Modules Design, Installation Communications and HMI Data communication; Distrib. Intelligence Field communication Data and field communication Configuring Maintenance SIMATIC S 7 -300 A&D AS, 08/2004, Chart 28 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives SIMATIC Human-Machine Interface - The window to your plant/process/machine SIMATIC S

Automation and Drives SIMATIC Human-Machine Interface - The window to your plant/process/machine SIMATIC S 7 -300 Introduction SIMATIC Panels: n CPUs Highlights Modules Design, Installation Communications and HMI Configuring Maintenance Panel PC or OS Push Button Panels, Text Displays, Operator Panels, Touch Panels or Multi Panels via MPI or PROFIBUS-DP n Multi Panels for an S 7 -300 n One panel for several automation systems Win. CC flexible - for simple PC-based visualization tasks Win. CC V 6 - the powerful process visualization system Win. CC MPI Multi Panels Push Button Panels Text Displays, Operator Panels, Touch Panels Easy parameterizing SIMATIC S 7 -300 A&D AS, 08/2004, Chart 29 © Siemens AG 2004 - Änderungen vorbehalten

Programming and configuring Made easy with STEP 7 Automation and Drives SIMATIC S 7

Programming and configuring Made easy with STEP 7 Automation and Drives SIMATIC S 7 -300 n Easy Introduction CPUs Highlights Modules Design, Installation Communications and HMI Configuring Maintenance to use Object-oriented, intuitive user interface n Configuring instead of programming n Standard function blocks parameterizing instead of programming n n Uniformity across the family – common database n Powerful functions e. g. module parameters set by software n Offline simulation n We work according to standard! Programming languages in conformity with IEC 61131 -3 n Windows 95/98/NT/2000/XP Professional operating system n SIMATIC S 7 -300 A&D AS, 08/2004, Chart 30 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives Maintenance just as easy as everything else SIMATIC S 7 -300

Automation and Drives Maintenance just as easy as everything else SIMATIC S 7 -300 Introduction CPUs Highlights Modules Design, Installation n Easy change of user program without the need for a programmer n n n Micro Memory card Update device Download via teleservice n Easy, safe module replacement without the need for a programmer Module parameters are stored centrally in the CPU n CPU initializes newly replaced modules n so that you can replace modules even during operation (hot swapping) n Communications and HMI Configuring Maintenance n Maintenance-free thanks to battery-less operation n Retentive feature for data, flags, timers and counters SIMATIC S 7 -300 Reduction in service time A&D AS, 08/2004, Chart 31 © Siemens AG 2004 - Änderungen vorbehalten

Automation and Drives GG-Kennung oder Produktname SIMATIC S 7 -300 The universal PLC for

Automation and Drives GG-Kennung oder Produktname SIMATIC S 7 -300 The universal PLC for system solutions with production engineering as focal point