Automation and Drives Advanced Speed Control with SINAMICS

Automation and Drives Advanced Speed Control with SINAMICS S 120 Basic Starter Online Commissioning

Automation and Drives Open Starter Program & Go Online Production Machines Open Starter by Motor Icon for Sinamics Introduction Step 7 Hardware Configuration Starter Online Configuration Starter Offline Configuration Step 7 Programming Testing Application Go Online with Starter –Use n. Do not Upload to the PG! S 7 Control in Sinamics Drives For internal use only

Automation and Drives Default CU 310 or CU 320 Production Machines Right Click On CU 310 (or CU 320) and Choose… • Target Device / Restore Factory Settings Introduction Step 7 Hardware Configuration Starter Online Configuration Starter Offline Configuration Step 7 Programming Testing Application Check the Box – Save Factory Settings to ROM n. Power Cycle Drive after RAM to ROM Completed S 7 Control in Sinamics Drives For internal use only

Automation and Drives Complete Auto Configuration Production Machines Introduction Select Auto Configuration and Start Auto Configuration n. Choose Control type for Motor type n. Close after Initialization Step 7 Hardware Configuration Starter Online Configuration Starter Offline Configuration Step 7 Programming Testing Application S 7 Control in Sinamics Drives For internal use only

Automation and Drives Starter Offline Configuration Production Machines Introduction Step 7 Hardware Configuration Go Offline with the Sinamics Select Configuration under the Device Folders • • This Configuration is under the Drive Object Used Click On Configure DDS to Parameterize Drive Settings Starter Online Configuration Starter Offline Configuration Step 7 Programming Testing Application S 7 Control in Sinamics Drives For internal use only