application shipping setting application Corresponding adjustments 1 application

사양 항목 application / shipping setting application/ Corresponding adjustments 1 application/ Corresponding adjustments 2 Use the blade diameter Height of the nozzle determines the condition wheel cover ※Only when the write select a C. frame size / shipping setting frame size / Corresponding adjustments 1 frame size / Corresponding adjustments 2 카세트 부 카세트 사이즈 / shipping setting 12“Tape cut＆ Half cut Combined 카셋트부 카셋트 싸이즈 / Corresponding adjustments 1 사양 내용 a. silicon wafer(Φ 300 mm, Φ 200 mm) Power supply voltage a. silicon wafer(Φ 300 mm, Φ 200 mm) Shipping Mounting flange g. None a. 2"Standard Hub blade b. 2“Small Hub blade c. Other ※Please refer to flange type. ※Conditions listed as follows ·Cutting depth Z 1：mm Z 2：mm standard ·Work height(Include tape) : mm ·Use the blade diameter Z 1：mm Z 2：mm d. Other (12“Tape cut＆ Half cut Combined) d. Other (8“Tape cut＆ Half cut combined) d. Other(12"Infineon Special) Return Form Duct Fetch Specifications Safety Panel 사양 항목 ※ Standard cassette with the cinema type of the cassette can not be combined in a standard a. 1 Seimpeuro way cassette ※"300 mm 25 stage Cinema cassette" is selected, "Two cassettes seimpeuro way" can not be selected. ※If two-stage cassette 2 -8, what type of special specifications in the cassette is to fill Jeevan. a. *배면향 Shipping Porous table transfer SEMI-S 2 Specifications Overseas transmitter unit UV research Unit 사양 내용 b. Trans(208 V 220 V 240 V 380 V 415 V) ※Voltage written to select a special accessory→ ※What if other, fill out the specifics ※Flange type and size other than those listed above, fill out a special specification. ※Except for transfer flange M-type substrate to spare on the flanges. → It has not been written what is special specifications listed. ※Selected C , the specifics listed in the column. ※If selection of SEMI-S 2 specification, fixed anchors are attached to the machine. ※Transformer between the power cable attached UV research Unit, frame size, Corresponding parts, spare UV parts consumption, Constant supply【DFD 6360】 As for the currently under development. Will be completed on time Please check with our sales representative.

Specifications [ DFD 6360 -23950172 ] S/N: JK 1110 SOLD OUT Specifications [DFD 6360 -27780026 ] S/N: JK 1069 Specifics Use Only】 DPR Input DPR Classification Specification 1. KH 010357 -01 special specifications for the Infineon Dresden DFD 670 is based on the half-cut specifications. 2. KH 020034 -00 (DPR#KH 000530 -04) 3. KH 020314 -02 BBD locking lever added to the stopper. 4. KH 020146 -01 BCR holds the wafer by a preliminary response capabilities. Comments 1. Trans International, DTU 1530 transformer for unnecessary for the local supply. 2. Fluid nozzle, nozzle height, S / T on 10 mm from the surface to adjust both BCR response specifications Parts Preparation (Part Name/ Number / Remarks) MOJKZB 50 --BZ PLATE 2 Z 1·Z 2 axes, one from each. 「As for specifications and warranty of the device, the "Standard Specification" compliant. However, the special specifications or warranties about the separate exchanges with customers, if any, that information is a priority. "