Actual vs Budgeted Costs VARIANCE ANALYSIS Session Objectives
Actual v/s Budgeted Costs VARIANCE ANALYSIS
Session Objectives: Upon completion of this session, participants will be able to: Understand the concept of standard cost Establish and use standard costs Understand the process of variance analysis
Objectives (Continued) • Learn to calculate and interpret the following: Material Price Variance (MPV) Material Efficiency Variance (MEV) Labor Rate Variance (LRV) Labor Efficiency Variance (LEV) Over-Head Controllable Variance (OHCV) Over-Head Volume Variance (OHVV) Students will present and discuss a case study using concepts learnt so far (Group Project)
What are Standard Costs? 1. Standard cost refers to expected costs under anticipated conditions. 2. Standard cost systems allow for comparison of standard versus actual costs. 3. Differences are referred to as standard cost variances. 4. Variances should be investigated if significant.
Standard Costs and Budgets 1. Standard cost is the standard cost of a single unit. 2. Budgeted cost is the cost, at standard, of the total number of budgeted units.
Development of Standard Costs 1. Standard costs are developed in a variety of ways: a. Specified by formulas or recipes. b. Developed from price lists provided by suppliers. c. Determined by time and motion studies conducted by industrial engineers. d. Developed from analyses of past data.
Perfection Versus Practical Standards Two schools of thought: 1. Perfection standards: developed under the assumption that no obstacles to the production process will be encountered. 2. Practical Standards: developed under the assumption that there will be occasional problems in the production process.
Perfection Versus Practical Standards: A Behavioral Issue PERFECTION STANDARDS PRACTICAL OR ATTAINABLE STANDARDS Can only be attained under near perfect conditions Tight as practical, but still are expected to be attained • Peak efficiency • Lowest possible input prices • Best-quality material • No disruption in production • Occasional machine breakdowns • Normal amounts of raw material waste
Perfection Versus Practical Standards: A Behavioral Issue Should we use practical standards or perfection standards? Practical standards should be set at levels that are currently attainable with reasonable and efficient effort.
Perfection Versus Practical Standards: A Behavioral Issue I agree. Perfection standards are unattainable and therefore discouraging to most employees.
Using Standard-Costing Systems for Control STANDARD COST a budget for the production of one unit of product or service COST VARIANCE the difference between the actual cost and the standard cost ACTUAL COST used in the production of the product or service
Using Standard-Costing Systems for Control This variance is unfavorable because the actual cost exceeds the standard cost. Product Cost Standard A standard cost variance is the amount by which an actual cost differs from the standard cost.
Management by Exception Managers focus on quantities and costs that exceed standards, a practice known as management by exception. Amount Standard Direct Material Direct Labor Type of Product Cost
A General Approach To Variance Analysis 1. Direct material: materials price and materials quantity variance (MPV & MQV). 2. Direct labor: labor rate and labor efficiency variance (LRV & LEV). 3. Overhead: overhead volume variance (OHVV) and overhead controllable variance (OHCV).
Material Variances 1. Differences between standard and actual material costs: a. Material price variance. b. Material quantity variance.
Material Price Variance 1. Material price variance: (AP – SP) x AQp 2. (AP) = actual price per unit of material. 3. (SP) = standard price per unit of direct material. 3. (AQp) = actual quantity of material purchased. 4. Actual price > standard price: unfavorable. 5. Actual price < standard price: favorable.
Material Quantity Variance 1. Material quantity variance: (AQu – SQ)SP 2. (AQu) = actual quantity of material used. 3. (SQ) = standard quantity of material allowed for actual number of units produced. 4. (SP) = standard price of material. 5. Actual quantity > standard quantity: unfavorable. 6. Actual quantity < standard quantity: favorable.
You Get What You Measure
Direct Labor Variances 1. Differences between standard and actual direct labor costs: a. Labor rate variance. b. Labor efficiency variance.
Labor Rate Variance 1. 2. 3. 4. 5. 6. Labor rate variance: (AR – SR) x AH (AR) = actual wage rate. (SR) = standard wage rate. (AH) = actual number of labor hours. Actual rate > standard rate: unfavorable. Actual rate < standard rate: favorable.
Labor Efficiency Variance 1. Labor efficiency variance: (AH – SH) x SR 2. (AH) = actual number of hours worked. 3. (SH) = standard number of hours allowed for actual number of units produced. 4. (SR) = standard labor wage rate. 5. Actual hours > standard hours: unfavorable. 6. Actual hours < standard hours: favorable.
Overhead Variances 1. Differences between overhead applied to inventory at actual overhead costs: a. Controllable overhead variance. b. Overhead volume variance.
Standard Costs Let’s use the concepts of the general model to calculate standard cost variances, starting with direct material.
Material Variances Koala Camp Gear Company in Melbourne, Australia has the following direct material standard to manufacture one Tree Line tent: 12 square meters per tent at $8. 00 per square meter Last month Koala purchased 40, 000 square meters at $8. 15 per square meter and used 36, 400 square meters to make 3, 000 tents.
Material Variances We calculate material variances using formulas: MPV = AQP(AP – SP) MPV = 40, 000 sqm. × ($8. 15 – $8. 00) MPV = $6, 000 Unfavorable MQV = SP(AQU – SQ) MQV = $8. 00(36, 400 sqm. – 36, 000 sqm. ) MQV = $3, 200 Unfavorable
Standard Costs Now let’s calculate standard cost variances for direct labor.
Labor Variances Koala has the following direct labor standard to manufacture one Tree Line tent: 2 standard hours per tent at $18. 00 per direct labor hour Last month 5, 900 direct labor hours were worked at $19. 00 per hour to make 3, 000 tents.
Labor Variances We calculate labor variances using formulas: LRV = AH(AR - SR) LRV = 5, 900 hrs($19. 00 - $18. 00) LRV = $5, 900 Unfavorable LEV = SR(AH - SH) LEV = $18. 00(5, 900 hrs - 6, 000 hrs) LEV = $1, 800 Favorable
• CALCULATION OF OVERHEAD VARIANCES • SWC, Inc. uses standard costs to value its inventories. Overhead costs follow: • Budget Actual • Variable overhead $527, 000 $525, 500 • Fixed overhead $329, 375 $328, 750 • TOTAL OH $856, 375 $854, 250 • Units produced 15, 500 15, 000 • Calculate the overhead variances.
• FORMULA APPROACH OVERHEAD ACTUAL CONTROLLABLE = OVERHEAD VARIANCE (OHCV) FLEXIBLE BUDGETED - OVERHEAD FOR ACTUAL PRODUCTION (FLEX) • Overhead Controllable Variance (OHCV) • = $854, 250 - [$329, 375 + (15, 000 units × $34*)] • = $854, 250 - $839, 375 • = $14, 875 (U) • FLEX= BUDGETED FMOH + (BUDGETED VMOH / UNIT) * (ACTUAL UNITS) • *$527, 000 15, 500 units = $34 per unit = BUDGETED VMOH / UNIT
OVERHEAD VOLUME VARIANCE = FLEXIBLE BUDGETED OVERHEAD FOR ACTUAL PRODUCTION (FLEX) - OVERHEAD APPLIED USING STANDARD OVERHEAD RATE (PRORATED) Overhead Volume Variance (OHVV) = $839, 375 - (15, 000 units × $55. 25*) = $839, 375 - $828, 750 = $10, 625 (U) PRORATED = (BUDGETED MOH RATE PER UNIT) * (ACTUAL UNITS) *$856, 375 15, 500 units = $55. 25 per unit = BUDGETED MOH RATE PER UNIT
Labor Efficiency Variance – A Closer Look Poorly trained workers Poor quality materials Unfavorable Efficiency Variance Poor supervision of workers Poorly maintained equipment
Management By Exception 1. Investigation of standard cost variances is a costly activity 2. Management must decide which variances to investigate. 3. Most managers practice management by exception. 4. What is “exceptional? ” Usually an absolute dollar amount or a percentage dollar amount.
Management by Exception Take the time to investigate only significant cost variances. What is significant? Depends on the Size of the Organization Depends on the Production Process Depends on the Type of the Organization
Variance Analysis Cycle Identify questions Receive explanations Conduct next period’s operations Analyze variances Begin Take corrective actions Prepare standard cost performance report
Significance of Cost Variances: When to Follow Up How does a manager know when to follow up on a cost variance and when to ignore it? Size of Variance Absolute Amount ? Relative Amount
Significance of Cost Variances • Size of variance • Dollar amount • Percentage of standard What clues help me to determine the variances that I should investigate? • • • Recurring variances Trends Controllability Favorable variances Costs and benefits of investigation
Significance of Cost Variances: When to Follow Up How do I know which variances to investigate? Larger variances, in dollar amount or as a percentage of the standard, are investigated first. We could use a rule of thumb such as: investigate all variances that are over $10, 000 or over 10 percent of the standard cost.
Significance of Cost Variances: When to Follow Up What about recurring variances? None of the variances are greater than $10, 000 or 10% for any one month, but they should be investigated because of they have continued for several months.
Significance of Cost Variances: When to Follow Up What about trends? None of the variances are greater than $10, 000 or 10% for any one month, but they should be investigated because of the unfavorable trend.
Significance of Cost Variances: When to Follow Up Controllability Favorable Variances A manager is more likely to investigate a variance that is controllable by someone in the organization than one that is not. It is as important to investigate significant favorable variances as well as significant unfavorable variances. Cost and Benefits of Investigation The decision whether to investigate a variance is a cost benefit decision
Statistical Analysis Warning signals for investigation Favorable Limit • Desired Value • • • Unfavorable Limit 1 2 3 4 Variance Measurements 5 6 7 • 8 • 9
Behavioral Effects Of Standard Costing Standard costs, budgets, and variances are used to evaluate the performance of individuals and departments. They can profoundly influence behavior when they are used to determine salary increases, bonuses, and promotions. 16 -43
Which Managers Influence Cost Variances? Direct-material price variance The purchasing manager Get the best prices available for purchased goods and services through skillful purchasing practices Direct-material quantity variance The production supervisor Skillful supervision and motivation of production employees, coupled with the careful use and handling of materials, contribute to minimal waste Direct-labor rate variance The production supervisor Generally results from using a different mix of employees than that anticipated when the standards were set Direct-labor efficiency variance The production supervisor Motivating employees toward production goals and effective work schedules improves efficiency
Quick Review Question #1 1. What does an unfavorable overhead volume variance mean? a. Overhead costs are out of control. b. Overhead costs are under control. c. Production was greater than anticipated. d. Production was less than anticipated.
Quick Review Answer #1 1. What does an unfavorable overhead volume variance mean? a. Overhead costs are out of control. b. Overhead costs are under control. c. Production was greater than anticipated. d. Production was less than anticipated.
Quick Review Question #2 2. Standard material costs per unit are $3. 50. Actual costs per unit are $3. 80 Actual quantity is 3, 000. Standard quantity is 2, 800. Material price variance is: a. b. c. d. $900 favorable $900 unfavorable $700 unfavorable
Quick Review Answer #2 2. Standard material costs per unit are $3. 50. Actual costs per unit are $3. 80 Actual quantity is 3, 000. Standard quantity is 2, 800. Material price variance is: a. b. c. d. $900 favorable $900 unfavorable $700 unfavorable
Quick Review Question #3 2. Standard material costs per unit are $3. 50. Actual costs per unit are $3. 80 Actual quantity is 3, 000. Standard quantity is 2, 800. Material quantity variance is: a. b. c. d. $900 favorable $900 unfavorable $700 unfavorable
Quick Review Answer #3 2. Standard material costs per unit are $3. 50. Actual costs per unit are $3. 80 Actual quantity is 3, 000. Standard quantity is 2, 800. Material quantity variance is: a. b. c. d. $900 favorable $900 unfavorable $700 unfavorable
Quick Review Question #4 4. What does a favorable labor efficiency variance mean? a. Labor rates were higher than called for by standards. b. Inexperienced labor was used, causing the rate to be lower than standard. c. More labor was used than called for by standards. d. Less labor was used than called for by standards.
Quick Review Answer #4 4. What does a favorable labor efficiency variance mean? a. Labor rates were higher than called for by standards. b. Inexperienced labor was used, causing the rate to be lower than standard. c. More labor was used than called for by standards. d. Less labor was used than called for by standards.
- Slides: 52