ABB STOTZKONTAKT Gmb H ABB ibus KNX Room

ABB STOTZ-KONTAKT Gmb. H ABB i-bus® KNX Room Master, Premium, RM/S 2. 1 © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 1

New Innovation Room Master § Innovation features § § © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 2 Room Scenarios § Recall with one group-address § All function in the room (e. g. lighting, blind, fan coil, sockets and thermostat) are setting § Recall internal (e. g. binary inputs) § Recall external (e. g. reception) Device connection internal § between in- and outputs § without group-address

Second Step - Overview Room: Commands External commands from the Reception § Check In – Room occupied § Check Out – Room vacant § Standby – Room free for Servicing Device internal commands from the binary inputs § Keycard on the entrance § Master on the bedside § Emergency call in the bathroom Room internal commands (via bus) © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 3 § Sensor inputs switch device outputs § Change the operating mode of the Room Thermostat (RT) § Integration of further KNX-devices

Room Scenario Overview § Altogether 16 Room Scenario are configurable § § Room Scenario are grouped in pairs § Keycard move § Keycard remove Each Room Scenario § can be activated on receipt of an externally 1 byte telegram or device internally via a binary input § can control up to 7 communication objects § © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 4 these controls can be used to control the Room Master itself, external KNX-device in the room or in the building, e. g. the reception

Room Scenario (RS) Allocation (Default settings) § RS 3 Standby RS 4 Emergency Call § RS 5 Keycard remove RS 6 Keycard move § § § RS 7 Master OFF RS 8 Master ON § All Room Scenario are freely configurable § § § © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 5 RS 9 free RS 10 free RS 1 Check In RS 2 Check Out § § § RS 11 free RS 12 free RS 13 free RS 14 free RS 15 free RS 16 free

Room Scenario Overview: Events A Room Scenario consists of two control events § one can be sent immediately § other can be sent immediately or with a delay Per control event it can configured whether © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 6 § a KNX Scene is trigged internally or via the bus § two 1 bit values are sent § the Room Temperature is switched on/off § a certain operation mode in the Room Thermostat is set § the automatic function for the blinds is activated § the internal blocking of the inputs is activated

Room Scenario KNX Scene § § © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 7 On activation of a Room Scenario via a only KNX Scene This has clear advantages: § Simple integration of further sensors and actors in the room § Clear separation to other rooms by use of one “room-group address” § No unnecessary bus load by internal Room Scenario (internal used) § Flexible configuration of the functionality

Room Scenario How does it work? Consumer Fan Coil KNX Sensor Inputs Room Thermostat Master Reception © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 8 Commands - internal control - direct connection - via bus

Floor plan Complete § Hotel Room (1 ½ Room) TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 9

Check In – Room occupied Reception activates Room Scenario 1 § floor light and the desk light switch on § Room Thermostat change the operating mode to Comfort § specified inputs are blocked TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 10 Commands - internal control - direct connection - via bus

Check Out – Room vacant Reception activates Room scenario 2 § lights switch off and bring the blind down § Room Thermostat change the operating mode to Standby § specified inputs are blocked TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 11 Commands - internal control - direct connection - via bus

Standby – Room free for Servicing Reception activates Room scenario 3 § lights switch off and run the blind up § Room Thermostat switch off and change the operating mode to Building protection TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 12 Commands - internal control - direct connection - via bus

Emergency call operates Emergency call activates Room scenario 4 § different lights switch on § display Do not disturb switch off § message to the reception, remainder unchanged TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 13 Commands - internal control - direct connection - via bus

Keycard remove Keycard activates room condition 5 § floor light switch off with a delay, remainder incl. sockets immediately § change Room Thermostat the operating mode to Building protection, blind in automatic, specified inputs are blocked TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 14 Commands - internal control - direct connection - via bus

Keycard move Keycard activates room condition 6 § floor light, desk light and sockets switch on § Room Thermostat change the operating mode to Comfort, Display Room occupied on, specified inputs are enable TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 15 Commands - internal control - direct connection - via bus

Master OFF Master activates Room scenario 7 § all lights in the room switch off § display Do not disturb switch on and the Room service off § remainder remains unchanged TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 16 Commands - internal control - direct connection - via bus

Master On Master activates Room scenario 8 § floor light and desk light switch on § remainder remains unchanged TV Content area © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 17 Commands - internal control - direct connection - via bus

Fan Coil-Unit Window Contact / Drip Tray © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 18 § connect window contact via group address to the Room Thermostat § connect drip tray via group address to the Room Thermostat Commands - internal control - direct connection - via bus

Summary Room Master § § © ABB STOTZ-KONTAKT Gmb. H 2 CDC 514 051 N 0201 | Slide 19 New innovation features § Room Scenario intern/extern § Internal connection between in- and outputs Highly flexible § compatible Room Thermostat RDF/A § problem free integrated further KNX devices § No external auxiliary supply voltage required § By the innovation of special default settings the basic features are functional in the room § unpack § connect § finish