475 475 V 23 Modification Overview Production of

  • Slides: 18
Download presentation
475, 475 V 2½”-3”

475, 475 V 2½”-3”

Modification Overview Ø Production of the 2½ - 3” sizes began in 1998. Ø

Modification Overview Ø Production of the 2½ - 3” sizes began in 1998. Ø The lead free version (XL) was introduced in 2011.

Single Access Cover Removal Cover is secured by a grooved coupling. Ø Cover has

Single Access Cover Removal Cover is secured by a grooved coupling. Ø Cover has no spring load. Ø

Check Valve Removal Check valve module. Ø Checks are secured by retainers and oring

Check Valve Removal Check valve module. Ø Checks are secured by retainers and oring sealed. Ø #1 check must be removed before #2 can be removed Ø

Check Valve Removal Plastic Retainer – There is one retainer securing the #1 check

Check Valve Removal Plastic Retainer – There is one retainer securing the #1 check module. Ø Pinch together the exposed ends, push down, and then pull downstream. Ø

Check Valve Removal Wire Retainer – There are two separate spring loaded plate retainers

Check Valve Removal Wire Retainer – There are two separate spring loaded plate retainers that secure the #2 check module. Ø Pinch the sides of the spring together and rotate the plates out of the body groove, one at a time. Ø

Check Valve Removal Ø Once the retainer is removed the check module can be

Check Valve Removal Ø Once the retainer is removed the check module can be pulled straight out of the body.

Check Disc Replacement Remove the nut, washer, o-ring on back of module. ** Do

Check Disc Replacement Remove the nut, washer, o-ring on back of module. ** Do not remove any hardware from the spring side of module. Ø Separate the disc retainer from the module. Ø

Check Seat Removal The check seat is part of the check module and can

Check Seat Removal The check seat is part of the check module and can not be removed. Ø If the seat is damaged, the complete check module will need to be replaced. Ø

Check Valve Reassembly Notes Lubricate check module o-ring. Ø Install the check module into

Check Valve Reassembly Notes Lubricate check module o-ring. Ø Install the check module into the body and close the test cock to hold check in place. Ø

Check Valve Reassembly Notes Plastic Retainer Ø Install the plastic retainer by inserting one

Check Valve Reassembly Notes Plastic Retainer Ø Install the plastic retainer by inserting one end into the body groove and then sliding your hand around the face of the retainer pushing it into the groove as you go. Ø The retainer will snap into place when it is fully seated. Ø

Check Valve Reassembly Notes Wire Retainers Ø Retainers are positioned at 12: 00 and

Check Valve Reassembly Notes Wire Retainers Ø Retainers are positioned at 12: 00 and 6: 00. Ø Install each retainer into the body groove one plate at a time. Ø Squeeze the spring ends together to clear the stops on the face of the seat. Ø

RV Cover Removal Cover is sealed by the diaphragm. Ø Remove sensing line. Ø

RV Cover Removal Cover is sealed by the diaphragm. Ø Remove sensing line. Ø Cover has a slight spring load. Ø Hold cover firmly as the bolts are removed. Ø

RV Stem Removal Gently pull on diaphragm to remove the RV stem. Ø The

RV Stem Removal Gently pull on diaphragm to remove the RV stem. Ø The spring should fall out when the stem is removed. Ø

RV Seat Removal The seat is pushed into the body and oring sealed. Ø

RV Seat Removal The seat is pushed into the body and oring sealed. Ø Simply pull the seat straight out of the body. Ø

RV Stem Disassembly Ø Remove the retaining bolt and pull apart.

RV Stem Disassembly Ø Remove the retaining bolt and pull apart.

RV Rubber Replacement The diaphragm and seat disc are free once the RV stem

RV Rubber Replacement The diaphragm and seat disc are free once the RV stem has been disassembled. Ø The bead and cup of the diaphragm should face toward the bolt end of the stem. Ø Reassemble stem in reverse order. Ø

RV Reassembly Notes Form the diaphragm to lay flat against the RV cover. Ø

RV Reassembly Notes Form the diaphragm to lay flat against the RV cover. Ø The bead on the diaphragm will line up with the groove on the RV body. Ø Replace and lubricate the plunger o-ring. Ø

475 475 V 475 XL 410 Modification Overview475 475 V 475 XL 410 Modification Overview
475 DA 475 DAV 410 Modification Overview Production475 DA 475 DAV 410 Modification Overview Production
CTC 475 Income taxes ATCF CTC 475 ReviewCTC 475 Income taxes ATCF CTC 475 Review
Middle Dark Ages 475 Fall of Rome 475Middle Dark Ages 475 Fall of Rome 475
Biology 475 Topics in Applied Microbiology Biology 475Biology 475 Topics in Applied Microbiology Biology 475
CTC 475 Review n Cost Estimates CTC 475CTC 475 Review n Cost Estimates CTC 475
Overview Overview Overview Overview Overview Overview Overview RockOverview Overview Overview Overview Overview Overview Overview Rock
Capitalism Production systems Production systems Production systems ProductionCapitalism Production systems Production systems Production systems Production
ntrast Modification in Image Data togram Modification Rulentrast Modification in Image Data togram Modification Rule
2 Behavior Modification Cengage Learning 2015 Behavior Modification2 Behavior Modification Cengage Learning 2015 Behavior Modification
NMC Course Modification NMC Degree Apprenticeship Modification AutumnNMC Course Modification NMC Degree Apprenticeship Modification Autumn
Skeletal Modification Vocab to know Skeletal Modification AnySkeletal Modification Vocab to know Skeletal Modification Any
Modification Details Progress Plan demonstration Modification Details CannyModification Details Progress Plan demonstration Modification Details Canny
1 UNIT 4 MODIFICATION 2 Key points modification1 UNIT 4 MODIFICATION 2 Key points modification
350 350 A 212 Modification Overview Production of350 350 A 212 Modification Overview Production of
RPDA 4 A 2 6 Modification Overview ProductionRPDA 4 A 2 6 Modification Overview Production
40 200 2 Modification Overview Production of the40 200 2 Modification Overview Production of the