3152002 Friday Plane Stress Plane Strain J Integral

3/15/2002, Friday Plane Stress Plane Strain J Integral Hertzberg Chapter 8. 6

Crack Tip Yielding Energy release rate concept: Fracture toughness of a material depend on the volume of material capable of plastic deformation prior to fracture.

Yielding Zone Three-dimensional view of the yield zone around a crack tip. As we move towards the center of the sample, the axial stress become non-zero and eventually approach the planestrain value. The reason that the central portion of a think sample approaches plane strain is that the bulk of the sample, which is lowly stressed compared to the crack tip region, act as clamp preventing Poisson’s concentration in z direction

Dog Bone Yielding Shape

Hydrostatic Von Mises equivalent stress

Through Thickness Stress

Fracture Toughness KIC, plane-strain fracture toughness. When the thickness is increased to bring about plastic constraint and plane-strain conditions at the crack tip, the toughness drops. The very important aspect of this low level of toughness is that it does not decrease further with increasing thickness, thereby making this value a conservative lower limit of material toughness in any given engineering application.

KIC Test Specimen A valid plane-strain fracturetoughness test is performed when the specimen thickness and crack length are both greater than a certain minimum value.

Three Point Bend

Crack Tip Mesh