1 Nomenclature and Functions Front Side Display Panel

1. Nomenclature and Functions Front Side Display Panel A touch switch can be made upon the screen at any point, and can be used as a lamp or a switch. Power Indicator (Green) Normally lit when power is turned ON Wiring Cable (Cable Length 3 m or 10 m) Divided into the connection for RS-232 C, 422 communications and connection for 24 V(DC), emergency stop switch output, enable switch output, function switch output. *The emergency stop switch and 3 position switch, function switch output are processed by hard-wire. Emergency Stop Switch (Push-look Switch) This key remains in the down position once pressed. It can be used to make contact output. (normally closed contact) Function Switch One normally open contact

1. Nomenclature and Functions Rear Side Memory Card Connector Used to connect the memory card for storing and transmitting screen data, and system programs. USB Slave Connector This is a USB Type B connector. Enable Stop Switch 3 position Switch It can be used to make contact output. (normally open contact)

2. External Dimensions Unit: mm

3. Wiring for Power Supply Handy PT(NSH 5) NSH Accessory Cable Breaker 24 V dc Power Connector

4. Emergency Stop Switch Contact Output E-Stop SW Three normally closed contact Handy PT(NSH 5) NSH Accessory Cable Push lock output load Connector Push lock key 24 V dc Push lock output load

5. Enable Switch Contact Output Handy PT(NSH 5) NSH Accessory Cable Operation output Enable SW Two normally open contact load Connector 24 V dc Operation output

6. Function Switch Contact Output Handy PT(NSH 5) NSH Accessory Cable Operation output Function SW One normally open contact Connector load 24 V dc Operation output

8. RS 232 C or RS 422 Handy PT(NSH 5) NSH Accessory Cable Connector DSUB 37 Pin or Wiring

Wiring type (15) (14) D-sub type